Light Hood with open chin
McHurt€95.00
No longer available
Lieferzeit 2-3 Tage**
Our light full masks will fit any head snugly like a second skin.
They are sewn from particularly soft and slightly elastic aniline leather (see additional information below), creating a very flattering appearance.
The leather will fit snugly on any head, clearly showing its shape below. The tighter the mask is worn, the more obvious this effect will be.
This particular version offers a very generous opening, allowing the wearer to open their mouth wide, and to perform particular tasks that way.
Should keeping the mouth open prove challenging for them, our mouth retractors( s. Art.-No. MGM111 or MGM112) can be used for assistance.
As a matter of principle, our masks have their eyes sewn shut, in order to keep the wearer focused on their tasks. This leads to a marked sensory impairment, specifically, rendering the wearer completely blind.
Use of a gag can enhance the resulting helplessness nicely – assuming the mouth is not needed for other things at the time.
We decided to keep our mask rather short, keeping the neck and throat mostly uncovered. This way it can easily be combined with our neck corset or other accessories.
Available in four sizes.
Refer to the table below to find your size.
Size chart: Leather Masks
(all measurements are in centimetres!)
| S | M | L | XL | |
|---|---|---|---|---|
| Circumference of neck |
33-36 |
36-39 | 39-42 | 42-45 |
| Circumference of head at mouth |
46-51 | 49-54 | 52-58 | 57-61 |
| Circumference of head above eyebrows |
52-56 | 55-59 | 58-62 | 61-65 |
| Circumference of head: tip of chin - back of head |
63-66 | 65-68 | 67-70 | 69-72 |
Advice for easy putting-on of mask:
First open the lacing all the way to the top.
As soon as the mask has been pulled over the head, do not immediately pull the cords tight at the top. Instead evenly pull the cords all the way down without using too much force. After this, slowly tighten from top to bottom until the mask is at the desired tightness.
This way of tightening is necessary in order to guarantee the mask’s perfect fit. If you start by pulling the upper part very tight, the entire mask may ride up and create the impression of not fitting.
What does Aniline Leather mean?
Do not let the material’s name confuse you. Historically, this type of leather has been dyed using aniline-based dyes, but today it refers to a particular natural, high-quality leather.
You can find more detailed information here:
https://en.wikipedia.org/wiki/Aniline_leather
Aniline leather is tanned and subsequently dyed using entirely water-soluble dyes. In contrast to nappa leather, no additional pigment layer is applied, as this would hide small imperfections. This means that aniline leather can only be made from skins that have no wounds or marks whatsoever, which results in only five out of 100 being of sufficient quality.
The result of this is aniline leather being particularly pleasant, optically as well as haptically. Also it is slightly elastic to the pull in one direction. This is an advantage when being used for our light full-head masks, as it makes them particularly tight and snug-fitting, almost like a rubber mask.
Care Instructions:
As its surface lacks a pigment layer, aniline leather is not waterproof. You should avoid spilling food or drink on the mask.
To clean only wipe the mask down with a damp cloth. Do not use grease or oil.
If the leather should lose some of its softness after a while, simply massage it using your hands. It will quickly become as soft and supple as new.
Please measure the following areas with a tape measure. Alternatively you can use a thread or cord which after marking can be measured with a ruler.
The most important measurement is the circumference of head: tip of chin - back of head
If you are unsure, please send us the single measurements and we will be glad to help you further!
A: Circumference of neck
B: Circumference of head at height of mouth
C: Circumference of head at height of eyebrows
D: Circumference of head: tip of chin - back of head (longest distance)
Login
Accessory Items
Ball gag with red ball made from Platinum-Silicone on a soft leather strap. Our gag balls are completely taste- and odourless and offer a very pleasant bite resistance. They are flexible enough to not damage the teeth, but solid enough to not be able to flatten the ball with the mouth. The balls are very robust. Even forceful bites will hardly leave any teeth marks. These gags can be worn very comfortably and for a long time if needed. They leave relatively few marks on the face, as the straps are stitched from soft garments leather and free from studs or eyelets, except for the buckle fastener at the back. Available with three different sized silicone balls: Small:approx. 38 millimetres (for small chatterboxes and people who easily retch) Medium:approx. 45 millimetres (the medium standard size) Large:approx. 52 millimetres (for big chatterboxes and for the connoisseur of quietude) Extra Large: approx. 60mm (for those special cases who will not be silenced by a Large ball)Please note: For most people accommodating a 60mm-ball will not be anatomically possible! Only select size XL, if you already have practical experience using balls sized Large. Otherwise it might turn into a case of trying to bite off more than you can chew. And then there will be tears.
Medical Retractor, modelled on Whitehead, made from stainless steel with double-sided locking grid. The neck strap, made from soft Nappa leather, prevents by all means any attempt of pressing out the gag with the tongue. It should be tightened only after spreading up the gag. Available in two sizes: Medium: Width approx. 12 centimetres, maximal spread approx. 55 millimetres Large: Width approx. 14 centimetres, maximal spread approx. 60 millimetres Made from high-gloss polished surgical stainless steel,strap made from soft cowhide nappa
Medical Retractor, modelled on Whitehead, made from stainless steel with double-sided locking grid. The neck strap, made from soft Nappa leather, prevents by all means any attempt of pressing out the gag with the tongue. It should be tightened only after spreading up the gag. Available in two sizes: Medium: Width approx. 12 centimetres, maximal spread approx. 55 millimetres Large: Width approx. 14 centimetres, maximal spread approx. 60 millimetres Made from surgical stainless steel with satin finish,strap made from soft cowhide nappa
Deswegen ist ein Ringknebel die richtige Wahl Dieser Knebel ist auf ganzer Linie ein gemeines Ding. Der Ring hält den Mund weit geöffnet und drückt die Zunge nach hinten. Genau diese Konstruktion macht den Ringknebel so interessant. Der Ring hält den Mund offen und kann je nach Größe das Einführen verschiedener Gegenstände ermöglichen. Gleichzeitig können die weit geöffnete Mundstellung und die nach hinten gedrängte Zunge das Schlucken erschweren und den Speichelfluss verstärken. Gerade dieser Effekt kann in BDSM Szenarien gezielt für Demütigung eingesetzt werden. Der Ringknebel ist in drei Größen erhältlich: 40, 45 und 50 Millimeter Innendurchmesser. Dabei sollten Sie die Größenangabe nicht einfach mit der Größe eines Ballknebels vergleichen. Ein Metallring mit 50 Millimetern Innendurchmesser stellt für den Mund eine andere Herausforderung dar als ein Ballknebel mit einem Durchmesser von 50 Millimetern. Wenn Sie bisher mit Ballknebeln Erfahrung gesammelt haben, sollten Sie deshalb nicht automatisch zur gleichen Größe greifen. Gerade bei einem Ringknebel empfiehlt es sich, zunächst eine kleinere Variante zu wählen und sich an die Konstruktion zu gewöhnen. Der Ring wird mit einem weichen Lederriemen im Nacken befestigt. Die Länge des Riemens lässt sich an unterschiedliche Kopfgrößen anpassen. Welche Größen gibt es beim Ringknebel? Bei diesem Ringknebel stehen drei Innendurchmesser zur Auswahl: 40, 45 und 50 Millimeter. Die Angabe bezieht sich auf den Innendurchmesser des Rings. Das ist bei der Auswahl entscheidend, denn ein größerer Ring verändert die Mundöffnung deutlich. Schon der Sprung von 40 auf 50 Millimeter bedeutet eine erhebliche Veränderung. Wenn Sie bisher beispielsweise einen Ballknebel mit 50 Millimetern verwendet haben, sollten Sie daraus nicht ableiten, dass ein Ringknebel mit 50 Millimetern ebenfalls passend ist. Die beiden Konstruktionen verteilen den Druck und öffnen den Mund auf unterschiedliche Weise. Ringknebel mit bis zu 5 cm: Was bedeutet der Innendurchmesser? Ein Ringknebel mit 5 cm hat einen Innendurchmesser von 50 Millimetern. Diese Größe ist bereits eine deutliche Herausforderung für den Mund und sollte deshalb nicht einfach aufgrund der maximalen Größe gewählt werden. Gerade bei Ringknebeln ist die Vorstellung „größer ist besser" wenig hilfreich. Entscheidend ist, ob die Größe zur jeweiligen Anatomie passt und sich kontrolliert verwenden lässt. Die 50 Millimeter Variante kann für Personen mit entsprechend großem Kiefer infrage kommen. Eine pauschale Aussage, dass diese Größe für eine bestimmte Personengruppe grundsätzlich geeignet oder ungeeignet ist, lässt sich dagegen nicht treffen. Die individuelle Anatomie ist entscheidend. Ringknebel aus Metall Der Ring dieser Variante besteht aus Metall. Zusammen mit dem weichen Lederriemen entsteht eine Kombination aus einem festen Ring und einer flexiblen Befestigung. Gerade beim Ring selbst spielt die Verarbeitung eine wichtige Rolle. Kontrollieren Sie vor der Verwendung, ob der Ring unbeschädigt ist und keine Stellen aufweist, die im Mund unangenehm werden könnten. Auch der Lederriemen sollte regelmäßig auf Verschleiß kontrolliert werden. Bei einem Produkt, das direkt mit dem Mund in Kontakt kommt, gehört eine gründliche Reinigung zur normalen Pflege. Dabei sollten Sie die Eigenschaften von Metall und Leder berücksichtigen, da beide Materialien unterschiedlich behandelt werden müssen. Wie wählen Sie die richtige Größe aus? Bei einem Ringknebel ist die Größe einer der wichtigsten Punkte bei der Auswahl. Der Innendurchmesser bestimmt maßgeblich, wie weit der Mund geöffnet wird und wie stark die Zunge verdrängt werden kann. Wenn Sie bisher nur mit Ballknebeln gearbeitet haben, sollten Sie deren Größe nicht eins zu eins auf einen Ringknebel übertragen. Ein 50 Millimeter großer Ball und ein Ring mit 50 Millimetern Innendurchmesser fühlen sich im Mund deutlich unterschiedlich an. Im Zweifel ist die kleinere Variante der bessere Ausgangspunkt. Sie können sich mit der Konstruktion vertraut machen und anschließend beurteilen, ob eine größere Größe überhaupt sinnvoll ist. Achten Sie während der Anwendung auf Schmerzen, Taubheitsgefühle, Atemprobleme oder andere deutliche Beschwerden. In solchen Fällen sollte die Anwendung sofort beendet werden. Sind Ringknebel bequem? Ein Ringknebel ist kein Produkt, das auf ein möglichst unauffälliges Tragegefühl ausgelegt ist. Der offene Ring hält den Mund weit geöffnet und verändert die Position der Zunge. Genau diese Eigenschaften machen einen Teil seiner Wirkung aus. Wie angenehm oder unangenehm ein Ringknebel empfunden wird, hängt von der Größe, der individuellen Anatomie und der Dauer der Anwendung ab. Ein zu großer Ring kann die Belastung deutlich erhöhen. Auch der Lederriemen spielt eine Rolle. Er sollte so eingestellt werden, dass der Ring an seiner vorgesehenen Position bleibt, ohne unnötig Druck auf den Kopf auszuüben. Bei einem Ringknebel sollten Sie deshalb die Wirkung nicht allein anhand des Durchmessers beurteilen. Entscheidend ist das Zusammenspiel aus Größe, Konstruktion und individueller Anatomie. Ringknebel oder Spinnenknebel? Ringknebel und Spinnenknebel unterscheiden sich bereits optisch deutlich. Beim Ringknebel befindet sich ein einzelner Ring im Mund. Seine Konstruktion sorgt dafür, dass der Mund weit geöffnet bleibt. Beim Spinnenknebel kommt eine andere Bauform zum Einsatz. Dadurch unterscheiden sich die beiden Knebel in ihrer Konstruktion und im Tragegefühl. Wenn Sie zwischen den beiden Varianten wählen, sollten Sie deshalb nicht allein nach dem Durchmesser gehen. Entscheidend ist, welche Konstruktion Sie suchen und welche Wirkung für Ihr BDSM Szenario im Vordergrund steht. Für einen detaillierten Vergleich der konkreten Modelle sollten die jeweiligen Produktinformationen herangezogen werden, da sich Spinnenknebel je nach Bauform unterscheiden können. Welche Alternativen gibt es zu einem Ringknebel? Die naheliegendste Alternative ist ein Spreizknebel. Ein Spinnenknebel stellt eine weitere Alternative dar, wobei die konkrete Konstruktion vom jeweiligen Modell abhängt. Hier wird der Mund durch einen Ball geöffnet beziehungsweise teilweise ausgefüllt. Dadurch entsteht ein anderes Tragegefühl als bei einem offenen Ring. Der Ringknebel eignet sich vor allem dann, wenn die offene Mundstellung und die damit verbundene Wirkung im Mittelpunkt stehen. Wenn Sie einen anderen Effekt oder ein anderes Tragegefühl suchen, kann ein anderer Knebeltyp die passendere Wahl sein. Wie reinigen und pflegen Sie einen Ringknebel? Der Ringknebel kommt direkt mit dem Mund in Kontakt und sollte deshalb nach der Verwendung gründlich gereinigt werden. Der Metallring und der Lederriemen müssen dabei getrennt betrachtet werden. Den Metallring können Sie entsprechend den Eigenschaften des verwendeten Metalls reinigen. Beim Lederriemen sollten Sie dagegen auf eine materialgerechte Pflege achten. Leder sollte nicht unnötig durchnässt werden und nach der Reinigung vollständig trocknen können. Nutzen mehrere Personen denselben Ringknebel, ist eine gründliche Reinigung zwischen den Anwendungen besonders wichtig. Nutzen Sie den Reinigungsvorgang außerdem für eine kurze Kontrolle des gesamten Produkts. Prüfen Sie den Ring, die Befestigung und den Lederriemen auf Beschädigungen oder Verschleiß. Wenn eine Komponente beschädigt ist, sollte der Ringknebel nicht weiter verwendet werden. Häufige Fragen zum Ringknebel Welche Funktion hat ein Ringknebel? Ein Ringknebel hält den Mund weit geöffnet und kann die Zunge nach hinten drücken. Dadurch können sich Speichelfluss und Schluckverhalten verändern. Was bedeutet Ringknebel 5 cm? Ein Ringknebel mit 5 cm besitzt einen Innendurchmesser von 50 Millimetern. Diese Größe sollte aufgrund der größeren Mundöffnung sorgfältig ausgewählt werden. Ist ein 50 mm Ringknebel größer als ein 50 mm Ballknebel? Die Maßangabe allein lässt keinen direkten Vergleich des Tragegefühls zu. Ein Ring mit 50 Millimetern Innendurchmesser und ein Ball mit 50 Millimetern Durchmesser haben unterschiedliche Konstruktionen und wirken deshalb unterschiedlich im Mund. Sind Ringknebel bequem? Das hängt von der Größe, der Anatomie und der Dauer der Anwendung ab. Ein Ringknebel verändert die Mundstellung deutlich und ist deshalb nicht mit einem gewöhnlichen Mundstück vergleichbar. Welche Materialien gibt es bei Ringknebeln? Bei der hier beschriebenen Variante besteht der Ring aus Metall und die Befestigung aus einem weichen Lederriemen. Was ist der Unterschied zwischen einem Ringknebel und einem Spinnenknebel? Beide Modelle unterscheiden sich in ihrer Konstruktion. Ein Ringknebel verwendet einen einzelnen offenen Ring im Mund, während Spinnenknebel eine andere Bauform besitzen. Wie reinigen Sie einen Ringknebel? Der Metallring sollte gründlich gereinigt werden. Der Lederriemen benötigt eine materialgerechte Pflege und sollte nicht unnötig durchnässt werden. Welche Größe sollten Sie wählen? Bei der Größenwahl sollten Sie die individuelle Anatomie berücksichtigen. Wer bisher Ballknebel verwendet hat, sollte deren Größe nicht automatisch auf einen Ringknebel übertragen. Im Zweifel bietet sich zunächst eine kleinere Variante an.
Similar Items
Our light full masks will fit any head snugly like a second skin.They are sewn from particularly soft and slightly elastic aniline leather (see additional information below), creating a very flattering appearance. The leather will fit snugly on any head, clearly showing its shape below. The tighter the mask is worn, the more obvious this effect will be. This version lacks eyeholes causing a significant sensory inhibition. The wearer will be completely blind, while fully able to speak and/or drink due to the mouth-opening. The restrictive effect can be enhanced significantly by using a ball-gag, which has to be put in before tightening the mask, as a tightened mask does not allow opening the mouth sufficiently. The ball-gag’s straps can be led through the mask’s mouth-opening and pulled tight at the back of the neck. Using this combination the light full-head mask will render the wearer completely helpless. Available in four sizes. Please refer to the table below to find your size. Size chart: Leather Masks (all measurements are in centimetres!) SMLXL Circumference of neck 33-36 36-39 39-42 42-45 Circumference of head at mouth 46-51 49-54 52-58 57-61 Circumference of head above eyebrows 52-56 55-59 58-62 61-65 Circumference of head: tip of chin - back of head 63-66 65-68 67-70 69-72 Advice for easy putting-on of mask: First open the lacing all the way to the top. As soon as the mask has been pulled over the head, do not immediately pull the cords tight at the top. Instead evenly pull the cords all the way down without using too much force. After this, slowly tighten from top to bottom until the mask is at the desired tightness. This way of tightening is necessary in order to guarantee the mask’s perfect fit. If you start by pulling the upper part very tight, the entire mask may ride up and create the impression of not fitting. What does Aniline Leather mean? Do not let the material’s name confuse you. Historically, this type of leather has been dyed using aniline-based dyes, but today it refers to a particular natural, high-quality leather. You can find more detailed information here:https://en.wikipedia.org/wiki/Aniline_leatherAniline leather is tanned and subsequently dyed using entirely water-soluble dyes. In contrast to nappa leather, no additional pigment layer is applied, as this would hide small imperfections. This means that aniline leather can only be made from skins that have no wounds or marks whatsoever, which results in only five out of 100 being of sufficient quality. The result of this is aniline leather being particularly pleasant, optically as well as haptically. Also it is slightly elastic to the pull in one direction. This is an advantage when being used for our light full-head masks, as it makes them particularly tight and snug-fitting, almost like a rubber mask. Care Instructions: As its surface lacks a pigment layer, aniline leather is not waterproof. You should avoid spilling food or drink on the mask. To clean only wipe the mask down with a damp cloth. Do not use grease or oil. If the leather should lose some of its softness after a while, simply massage it using your hands. It will quickly become as soft and supple as new.
Our light full masks will fit any head snugly like a second skin.They are sewn from particularly soft and slightly elastic aniline leather (see additional information below), creating a very flattering appearance. The leather will fit snugly on any head, clearly showing its shape below. The tighter the mask is worn, the more obvious this effect will be. This version’s mouth is shut, while the perforated eye area allows the wearer very good use of eyes but will markedly interfere with speaking. This means that this version is a lot more restrictive than the versions with a hole for the mouth. A ball-gag put in before tying the mask would be slightly visible but massively enhance restrictiveness. If needed, you can of course add a blindfold (like our narrow eye-mask ML111). Vital! Please note:The nose-area only has very small air-holes for breathing. If you close the eye-area, the influx of air may be reduced further. It may be necessary to enlarge the air-holes or add further holes in this case. Available in four sizes. Please refer to the table below to find your size. Size chart: Leather Masks (all measurements are in centimetres!) SMLXL Circumference of neck 33-36 36-39 39-42 42-45 Circumference of head at mouth 46-51 49-54 52-58 57-61 Circumference of head above eyebrows 52-56 55-59 58-62 61-65 Circumference of head: tip of chin - back of head 63-66 65-68 67-70 69-72 Advice for easy putting-on of mask: First open the lacing all the way to the top. As soon as the mask has been pulled over the head, do not immediately pull the cords tight at the top. Instead evenly pull the cords all the way down without using too much force. After this, slowly tighten from top to bottom until the mask is at the desired tightness. This way of tightening is necessary in order to guarantee the mask’s perfect fit. If you start by pulling the upper part very tight, the entire mask may ride up and create the impression of not fitting. What does Aniline Leather mean? Do not let the material’s name confuse you. Historically, this type of leather has been dyed using aniline-based dyes, but today it refers to a particular natural, high-quality leather. You can find more detailed information here:https://en.wikipedia.org/wiki/Aniline_leatherAniline leather is tanned and subsequently dyed using entirely water-soluble dyes. In contrast to nappa leather, no additional pigment layer is applied, as this would hide small imperfections. This means that aniline leather can only be made from skins that have no wounds or marks whatsoever, which results in only five out of 100 being of sufficient quality. The result of this is aniline leather being particularly pleasant, optically as well as haptically. Also it is slightly elastic to the pull in one direction. This is an advantage when being used for our light full-head masks, as it makes them particularly tight and snug-fitting, almost like a rubber mask. Care Instructions: As its surface lacks a pigment layer, aniline leather is not waterproof. You should avoid spilling food or drink on the mask. To clean only wipe the mask down with a damp cloth. Do not use grease or oil. If the leather should lose some of its softness after a while, simply massage it using your hands. It will quickly become as soft and supple as new.
Our light full masks will fit any head snugly like a second skin.They are sewn from particularly soft and slightly elastic aniline leather (see additional information below), creating a very flattering appearance. The leather will fit snugly on any head, clearly showing its shape below. The tighter the mask is worn, the more obvious this effect will be. This version leaves mouth and eyes open, meaning the wearer is able to see and speak. It does not allow for opening the mouth particularly wide though. This means that the mask can be used for anonymisation, but can also easily be made more restrictive by adding an eyemask (e.g. our narrow eyemask, Art.No. MML111) or a ball gag. This version with holes for mouth and eyes allows for particularly long periods of wearing but will mark skin at the openings for a while after taking off the mask. Available in four sizes. Please refer to the table below to find your size. Size chart: Leather Masks (all measurements are in centimetres!) SMLXL Circumference of neck 33-36 36-39 39-42 42-45 Circumference of head at mouth 46-51 49-54 52-58 57-61 Circumference of head above eyebrows 52-56 55-59 58-62 61-65 Circumference of head: tip of chin - back of head 63-66 65-68 67-70 69-72 Advice for easy putting-on of mask: First open the lacing all the way to the top. As soon as the mask has been pulled over the head, do not immediately pull the cords tight at the top. Instead evenly pull the cords all the way down without using too much force. After this, slowly tighten from top to bottom until the mask is at the desired tightness. This way of tightening is necessary in order to guarantee the mask’s perfect fit. If you start by pulling the upper part very tight, the entire mask may ride up and create the impression of not fitting. What does Aniline Leather mean? Do not let the material’s name confuse you. Historically, this type of leather has been dyed using aniline-based dyes, but today it refers to a particular natural, high-quality leather. You can find more detailed information here:https://en.wikipedia.org/wiki/Aniline_leatherAniline leather is tanned and subsequently dyed using entirely water-soluble dyes. In contrast to nappa leather, no additional pigment layer is applied, as this would hide small imperfections. This means that aniline leather can only be made from skins that have no wounds or marks whatsoever, which results in only five out of 100 being of sufficient quality. The result of this is aniline leather being particularly pleasant, optically as well as haptically. Also it is slightly elastic to the pull in one direction. This is an advantage when being used for our light full-head masks, as it makes them particularly tight and snug-fitting, almost like a rubber mask. Care Instructions: As its surface lacks a pigment layer, aniline leather is not waterproof. You should avoid spilling food or drink on the mask. To clean only wipe the mask down with a damp cloth. Do not use grease or oil. If the leather should lose some of its softness after a while, simply massage it using your hands. It will quickly become as soft and supple as new.
Our light full masks will fit any head snugly like a second skin. They are sewn from particularly soft and slightly elastic aniline leather (see additional information below), creating a very flattering appearance. The leather will fit snugly on any head, clearly showing its shape below. The tighter the mask is worn, the more obvious this effect will be. This version has an opening for the mouth as well as a perforated eye-area, which allows the wearer to see, but will make them anonymous to any onlooker. The mouth-opening permits speaking and drinking. The restrictive effect can be enhanced drastically using a blindfold (e.g. our narrow eye mask, Article MML111) and/or a ball-gag. The latter has to be put in before tightening the mask, as it is not possible to open the mouth sufficiently in a tight mask. The ball-gag’s straps can be led through the mask’s mouth-opening and pulled tight behind the neck. Using this combination the light full-head mask will render the wearer totally helpless. Vital! Please note:The nose-area only has very small air-holes for breathing. If you close the eye-area, the influx of air may be reduced further. It may be necessary to enlarge the air-holes or add further holes. Available in four sizes. Please find the measurements in the table below. Size chart: Leather Masks (all measurements are in centimetres!) SMLXL Circumference of neck 33-36 36-39 39-42 42-45 Circumference of head at mouth 46-51 49-54 52-58 57-61 Circumference of head above eyebrows 52-56 55-59 58-62 61-65 Circumference of head: tip of chin - back of head 63-66 65-68 67-70 69-72 Advice for easy putting-on of mask: First open the lacing all the way to the top. As soon as the mask has been pulled over the head, do not immediately pull the cords tight at the top. Instead evenly pull the cords all the way down without using too much force. After this, slowly tighten from top to bottom until the mask is at the desired tightness. This way of tightening is necessary in order to guarantee the mask’s perfect fit. If you start by pulling the upper part very tight, the entire mask may ride up and create the impression of not fitting. What does Aniline Leather mean? Do not let the material’s name confuse you. Historically, this type of leather has been dyed using aniline-based dyes, but today it refers to a particular natural, high-quality leather. You can find more detailed information here:https://en.wikipedia.org/wiki/Aniline_leatherAniline leather is tanned and subsequently dyed using entirely water-soluble dyes. In contrast to nappa leather, no additional pigment layer is applied, as this would hide small imperfections. This means that aniline leather can only be made from skins that have no wounds or marks whatsoever, which results in only five out of 100 being of sufficient quality. The result of this is aniline leather being particularly pleasant, optically as well as haptically. Also it is slightly elastic to the pull in one direction. This is an advantage when being used for our light full-head masks, as it makes them particularly tight and snug-fitting, almost like a rubber mask. Care Instructions: As its surface lacks a pigment layer, aniline leather is not waterproof. You should avoid spilling food or drink on the mask. To clean only wipe the mask down with a damp cloth. Do not use grease or oil. If the leather should lose some of its softness after a while, simply massage it using your hands. It will quickly become as soft and supple as new.
Our light full masks will fit any head snugly like a second skin.They are sewn from particularly soft and slightly elastic aniline leather (see additional information below), creating a very flattering appearance. The leather will fit snugly on any head, clearly showing its shape below. The tighter the mask is worn, the more obvious this effect will be. This version lacks eyeholes causing a significant sensory inhibition. The wearer will be completely blind, while fully able to speak and/or drink due to the mouth-opening. The restrictive effect can be enhanced significantly by using a ball-gag, which has to be put in before tightening the mask, as a tightened mask does not allow opening the mouth sufficiently. The ball-gag’s straps can be led through the mask’s mouth-opening and pulled tight at the back of the neck. Using this combination the light full-head mask will render the wearer completely helpless. Available in four sizes. Please refer to the table below to find your size. Size chart: Leather Masks (all measurements are in centimetres!) SMLXL Circumference of neck 33-36 36-39 39-42 42-45 Circumference of head at mouth 46-51 49-54 52-58 57-61 Circumference of head above eyebrows 52-56 55-59 58-62 61-65 Circumference of head: tip of chin - back of head 63-66 65-68 67-70 69-72 Advice for easy putting-on of mask: First open the lacing all the way to the top. As soon as the mask has been pulled over the head, do not immediately pull the cords tight at the top. Instead evenly pull the cords all the way down without using too much force. After this, slowly tighten from top to bottom until the mask is at the desired tightness. This way of tightening is necessary in order to guarantee the mask’s perfect fit. If you start by pulling the upper part very tight, the entire mask may ride up and create the impression of not fitting. What does Aniline Leather mean? Do not let the material’s name confuse you. Historically, this type of leather has been dyed using aniline-based dyes, but today it refers to a particular natural, high-quality leather. You can find more detailed information here:https://en.wikipedia.org/wiki/Aniline_leatherAniline leather is tanned and subsequently dyed using entirely water-soluble dyes. In contrast to nappa leather, no additional pigment layer is applied, as this would hide small imperfections. This means that aniline leather can only be made from skins that have no wounds or marks whatsoever, which results in only five out of 100 being of sufficient quality. The result of this is aniline leather being particularly pleasant, optically as well as haptically. Also it is slightly elastic to the pull in one direction. This is an advantage when being used for our light full-head masks, as it makes them particularly tight and snug-fitting, almost like a rubber mask. Care Instructions: As its surface lacks a pigment layer, aniline leather is not waterproof. You should avoid spilling food or drink on the mask. To clean only wipe the mask down with a damp cloth. Do not use grease or oil. If the leather should lose some of its softness after a while, simply massage it using your hands. It will quickly become as soft and supple as new.
This hood is famous since John Willies adventures around Sweet Gwendoline and other defencelessly tied up girls. The helplessly soulful gaze of Gwendoline is heartwarming and it raises the question, if this is due to the laced mask by itself, or maybe by a hidden gag underneath!? The Gwendoline Mask is made from very soft cow-Nappa, which molds wonderfully around the head when this mask is laced fully. The leather snuggles tightly around the mouth and reduces the ability to speak even without the use of a gag. When introducing a gag before lacing this mask it will stay subtly visible, but still won't be very conspicuous. The mask ends directly below the nose keeping only the field of view free, which will be pushed slightly outwards due to the tight lacing. The style of the mask is made to be short, so the neck remains free and can therefore be combined with our Neck Corset or other bondage paraphernalia for example. For the problem-free fitting of the Gwendoline Mask please open the lacing all the way to the top. Available in four sizes. Please find the measurements in the table below. Size chart: Leather Masks (all measurements are in centimetres!) SMLXL Circumference of neck 33-36 36-39 39-42 42-45 Circumference of head at mouth 46-51 49-54 52-58 57-61 Circumference of head above eyebrows 52-56 55-59 58-62 61-65 Circumference of head: tip of chin - back of head 63-66 65-68 67-70 69-72