New items from McHurt
Long connecting strap adjustable 24 to 52 centimetres, with snap hooks for easy attachment. Unit: 1 item
Long connecting strap adjustable 24 to 52 centimetres, with snap hooks for easy attachment. Unit: 1 item
Light bondage cuffs for wrists, made from black Nappa leather with decorative piping Translated 'Sefa' means 'Pleasure', which is an accurate description of the character of this series. It is a discreet 'going out version', which is very comfortable to wear and does not immediately give the impression of heavy bondage. Accordingly, Sefa bondage cuffs are by far not as robust as the cuffs in our other series. Nevertheless, they are of course suited to easily secure useless hands behind the back, for example. But they are not designed for bondage scenarios where stronger forces are at play, like for deployment on unruly Houdinis or for securing the ankles. Hence, we only produce these cuffs in regular wrist sizes. The cuffs of the Sefa series are sewn from two layers of very soft garment leather without padding and decoratively edged with piping. They are secured with a small strap and a buckle on the top of the wrist, so the D-ring, for connecting the cuffs, lies on the inside of the wrist. Available in two sizes: small: for very slender to slender wrists (approx. 12 to 16 centimetres) medium: for medium to robust wrists (approx. 16 to 22 centimetres)
Light bondage cuffs for wrists, made from black Nappa leather with decorative piping Translated 'Sefa' means 'Pleasure', which is an accurate description of the character of this series. It is a discreet 'going out version', which is very comfortable to wear and does not immediately give the impression of heavy bondage. Accordingly, Sefa bondage cuffs are by far not as robust as the cuffs in our other series. Nevertheless, they are of course suited to easily secure useless hands behind the back, for example. But they are not designed for bondage scenarios where stronger forces are at play, like for deployment on unruly Houdinis or for securing the ankles. Hence, we only produce these cuffs in regular wrist sizes. The cuffs of the Sefa series are sewn from two layers of very soft garment leather without padding and decoratively edged with piping. They are secured with a small strap and a buckle on the top of the wrist, so the D-ring, for connecting the cuffs, lies on the inside of the wrist. Available in two sizes: small: for very slender to slender wrists (approx. 12 to 16 centimetres) medium: for medium to robust wrists (approx. 16 to 22 centimetres)
The Chain-Cat presents itself as a delicate piece of jewelery with small golden chains, but behind this image lurks a very evil instrument which appears to be one of the most underestimated items from our range of whips! The approximately 30 tails, made from gold-coloured metal chains, cause a hefty impact, even when striking relatively softly. Especially when the ends are allowed to wrap around the inflicted body part, the tips leave very distinctive marks. So please take care! Length of chains approx. 30 centimetres Total length approx. 50 centimetres Diameter of handle approx. 29 millimetres Weight approx. 240 grams
Barbed wire flogger Looks can be deceiving – and that’s exactly the point. Our Barbed Wire Flogger may look like it’s made from real metal, but rest assured: it’s crafted entirely from black, round leather cord. Using a refined technique, our whip maker has managed to braid elements that mimic the appearance of barbed wire with striking authenticity. The impact? Not to be underestimated. Though the “barbed wire” is flexible and pliable to the touch, the braided tips can deliver a sharp, stinging sensation – especially with stronger strikes – and may leave visible marks, depending on intensity. For those who enjoy a biting kind of pain paired with bold design, this flogger is a thrilling discovery. What makes this piece truly stand out is the powerful combination of its distinctive look and unique tactile effect – a real eye-catcher and a daring pleasure to wield. One note on handling: the individual “wire” strands tend to tangle slightly with each other. Total length: approx. 69 cm Handle length: approx. 22 cm Handle diameter: approx. 2.5 cm
To make this toy we reconfigured our popular Belitsha Dog Whip into a tongue. The special sensation caused by these tongues is the result of the single-tail’s typical acceleration leading to the tip impacting at a corresponding speed. This can be particularly effective when using the tongue at a short distance, making the tip flip over. With conventional single tails this is only to be done with caution, but with the Belitsha-Tongue it will add that special something. In this it is similar to our Czech Devil’s Tail, but due to the thinner and softer leather used, this design veers towards the delicate and elegant. The handle ends in a snap hook, not in the shown D-Ring Length approx. 90 centimetres (inclusive D-ring)Diameter approx. 28 millimetresWeight approx. 200 grams
This bolero straitjacket made of black cotton fabric adapts well to all body shapes. The short cut fits snugly around the shoulders and upper body, while leaving the chest area free. A strap running down the center down the chest holds the jacket securely in place and ensures a stable fit. The bolero straitjacket is closed at the back with three straps – one at the neck and two over the shoulders – allowing it to be individually adjusted for a snug fit. For particularly easy donning, it is recommended to first close the two lower straps at the back and then fasten the strap in the chest area. The arms can be fixed in a flexible manner: they can be secured in the classic position in front of the body or raised and fixed to the ceiling or other attachment points, for example. An additional strap can also be used to create a classic straitjacket position. Made from sturdy black cotton fabric that is comfortable against the skin and at the same time stable enough to provide a secure hold. As an addition, an optional crotch strap can also be attached to the chest strap. Our ladies' or double crotch straps are suitable for this purpose. To attach the crotch strap, first hook the part of the crotch strap holder with the carabiner into the D-ring on the front of the chest strap. Slide the second part of the crotch strap holder with the fabric tab over the chest strap and position it in the center of the back. You can now attach the crotch strap from the front eyelet at the end of the crotch strap holder through the pubic area to the second eyelet at the back. You can also secure the crotch strap with either carabiners or locks.
If you have ever made the acquaintance of this particular dog beater, you will know to approach it with respect! This beater is the next step up from two of our dog whips, the “bastard offspring” of Lupus and Roy, if you will. This bred two characteristics of dog beaters out of it, namely the snap hook and the leash loop connected to the threaded leather. But it also combined the venomous evil of both parents. A real bad seed!Thus, we only recommend this beater to advanced pain enthusiasts, and suggest you apply it carefully at first.The dog beater is braided from oiled saddle leather, while the handle is wrapped in Nappa leather.Total length: 67 cm (plus 15 cm for the hand loop).
Until the middle of the last century the corporal punishment of insubordinate prisoners was commonplace in the prisons of North America. The standard implement for this was a prison strap, which was available in many different designs. Our Canadian prison strap corresponds with an original from the Canadian province Ontario. It is made from thick, very ridgid leather, which allows an exact dosage from playfully slapping to strict and punishing. The edges are carefully tapered und the back is elegantly covered in Nappa leather. The handle is re-enforced with a slightly flexible inlay. In the production of the Canadian prison strap we use our heavy English saddle leather (please see additional description below) in black, and Nappa leather for the back. Available in the following colours: black with grey stitching burgundy with black handle mahogany with black handle Length approx. 42 centimetres Width approx. 6 centimetres
With this spreader bar legs can be spread a distance of approximately 70 centimetres up to 120 centimetres. It also offers several ingenious details: Both ends feature removable elements, operated by a quick release connector. The D-rings of our various cuffs can now be secured with a screw into the slots. It is therefore possible to make the connection to the cuffs in the preparation stage without having to kneel at the feet of the person being secured during the session. When the person wearing the cuffs with the prepared connectors now stands in front of you, you can attach the spreader bar with the help of the quick release connector with a simple click, then push the legs apart and secure the other side in the same manner. Now you can seamlessly adjust the length by turning the centre element. Turning it one way extends both sides, the other way reduces the expansion. All this happens relatively quickly, due to the specially designed wide tread we use. To remove the spreader bar, operate the quick release by pulling the small button and slide it out. Now the straddled person can relax and will surely thank you for the relief. The spreader bar is robust enough to spread arms or legs, but not for the suspension of a load! The centre element consists of a strong tube in which the screw thread needs the space. Therefore this tube is not strong enough to bear any load. Scope of delivery: 1 Spreader Bar made from surgical stainless steel with adjustable from 70 centimetres to 120 centimetres, 2 quick release connectors (including two screws and one compatible hex key)
This gag‘s name will already clue you in to the evil nature of its use. When the Gag‘n‘Blow is put on, the gag shield will insert a tube safely between the wearer‘s teeth, thus forcing them to keep their mouth open. The opening is now ready to be used for pouring in liquids or to ensure the fullfilment of other duties. As soon as all tasks are completed, the mouth can be closed again with a plug on a little chain. This should ensure an atmosphere of demure silence. The gag is available in two sizes. The smaller version (44mm outer diameter) is bearable for most people, while the larger version (52mm outer diameter)) poses a considerable challenge. Anatomically speaking it is rare that diminutive individuals can get their mouth open wide enough to take in the voluminous tube. Normally this version is better suited for use on large-mouthed men. Also note that wearing the 52mm-“Gag‘n‘Blow“ will be more intense than wearing a Silicone Ball Gag of the same diameter, as the former will consistently keep the mouth open at maximum, while when inserting a ball gag the mouth has to be opened really wide only briefly. The leather shield and the strap are made from soft nappa cow‘s leather, while the tube is covered in artficial leather to ensure it can be cleaned thoroughly. The strap length will fit petite to large heads. Available with three different sized silicone balls: Medium:approx. 44 millimetres outer diameter and 36 millimetres inner diameter Large:approx. 52 millimetres outer diameter and 43 millimetres inner diameter
The handle of the Jute Cat is made by knotting various thin jute cords. This way a slightly flexible but still firm handle is created, resembling the classic shape of a flogger handle. However due to the rough jute material it will feel more distinctive and archaic.Sprouting from the handle are nine tails, each one wound from three jute cords. Their ends are made more extreme with a triplet of knots (Or do these make them more beautiful? You decide.) The Jute Cat’s impact is considerable. It can leave considerable bruises, worthy of a cat o’nine tails.<br /> Considering that at 150 grams weight this toy is a true featherweight of our range, you understand why we normally say “Cats are evil!”. Use with caution! It should also be noted that the Jute and Cotton Cat are vegan, in case you avoid animal products or just don’t like leather. And if you do like leather: The Leather Knot Whip (MWK311) is this darling’s opposite made from your preferred material.
Lady Black Ash is the smaller mate of Sir Black Ash. With a hitting surface of approx. 16 x 7,5 centimetres this paddle is typically suitable for graceful bottoms, but for sure more voluminous butts will also show nice reactions. The combination of total unelasticity of the wood and the big surface area causes a quite distinctively penetrating pain. The blows can be controlled precisely benign but in reality they bring out a very nasty effect quite easily. The six round holes are increasing the pain additionally since they cause an uneven compression of the soft flesh and in addition they irritate the butts with their edges. Furtheron they reduce the air drag and so cause an even sharper impact of the blow. As a consequence these wooden paddles belong to the instruments which should be checked out with care!In addition, we would like to draw your attention to the fact that wooden paddles should only be used on buttocks and thighs. The paddle lies comfortably in the hand due to the carefully rounded edges. The detachable handloop of leather cord provides a secure grip and the opportunity to hang the paddle to any place as a warning hint for potential delinquents. Made from polished black ash wood. Length approx. 30 centimetres (incl. handle, excl. hand loop) Width approx. 3,5 (in handle area) to 7,5 centimetres (hitting surface) Thickness approx. 12 millimetres Weight approx. 150 grams
This knot-whip is the counterpart to our Jute and Cotton Cats. We do not call this one a cat, as a cat’s tails should always be twisted or braided. The Knot Whip’s handle is knotted from several leather strips using a special technique. A somewhat flexible but still firm handle is created, resembling the shape of a classic flogger’s handle. Due to the knotting the handle will feel more traditional though. The handle’s leather strips seamlessly transition into the flat tails, whose ends are intensified by three knots each (Or “beautified”? It’s up to you.) The Knot Whip’s impact should be appreciated. It will leave significant marks, which live up to a Cat O’Nine Tail’s reputation. The Knot Whip is available in a small and a slightly larger version. The difference is due to the strength of the leather used. For the smaller Knot Whip we use aniline leather which is 1.5 mm strong, and a stronger thick leather for the larger version. Overall length of the small Knot Whip: approx. 48 cm. Diameter: approx. 2.5 cm. Overall length of the large Knot Whip: approx. 50 cm. Diameter: approx. 3 cm. Weight: between 130 – 150 grams
This baton is the version of our Big Bobby designed for leather fetishists. In colloquial English, police officers are often referred to as “Bobbies.” We’ve adopted this name for our baton, as it is in fact an authentic replica of an English police truncheon. The elegant leather covering of this Bobby significantly changes its appearance compared to the Big Bobby and offers a pleasing tactile experience for both the person wielding it and the one on the receiving end. With its deep grip ridges and detachable wrist strap, the Bobby sits very securely in the hand and allows for precise control. Due to the hardness of the wood, the Bobby delivers a penetrating and deep impact. It’s no coincidence that such batons are infamous as feared instruments of police enforcement. Accordingly, the general safety guidelines apply especially to this tool! Never strike directly on the spine or the kidney area with the Bobby, as this could cause serious internal injuries. Bruising is almost unavoidable even with moderate use. The leather covering does not change this! So please do not use it if you wish to avoid leaving marks! The Bobby is available in two types of wood: Black Ash Rosewood Length: approx. 45 centimeters Diameter: approx. 30 millimeters Includes a braided, securely integrated wrist strap made of nappa leather.Attention:Please note that our current Rosewood finish is more of a warm brown with a visible grain. The Black Ash color, on the other hand, is currently significantly lighter (see photos). Please be aware that variations like these are possible due to the natural material.
Our light full masks will fit any head snugly like a second skin.They are sewn from particularly soft and slightly elastic aniline leather (see additional information below), creating a very flattering appearance. The leather will fit snugly on any head, clearly showing its shape below. The tighter the mask is worn, the more obvious this effect will be. This version lacks eyeholes causing a significant sensory inhibition. The wearer will be completely blind, while fully able to speak and/or drink due to the mouth-opening. The restrictive effect can be enhanced significantly by using a ball-gag, which has to be put in before tightening the mask, as a tightened mask does not allow opening the mouth sufficiently. The ball-gag’s straps can be led through the mask’s mouth-opening and pulled tight at the back of the neck. Using this combination the light full-head mask will render the wearer completely helpless. Available in four sizes. Please refer to the table below to find your size. Size chart: Leather Masks (all measurements are in centimetres!) SMLXL Circumference of neck 33-36 36-39 39-42 42-45 Circumference of head at mouth 46-51 49-54 52-58 57-61 Circumference of head above eyebrows 52-56 55-59 58-62 61-65 Circumference of head: tip of chin - back of head 63-66 65-68 67-70 69-72 Advice for easy putting-on of mask: First open the lacing all the way to the top. As soon as the mask has been pulled over the head, do not immediately pull the cords tight at the top. Instead evenly pull the cords all the way down without using too much force. After this, slowly tighten from top to bottom until the mask is at the desired tightness. This way of tightening is necessary in order to guarantee the mask’s perfect fit. If you start by pulling the upper part very tight, the entire mask may ride up and create the impression of not fitting. What does Aniline Leather mean? Do not let the material’s name confuse you. Historically, this type of leather has been dyed using aniline-based dyes, but today it refers to a particular natural, high-quality leather. You can find more detailed information here:https://en.wikipedia.org/wiki/Aniline_leatherAniline leather is tanned and subsequently dyed using entirely water-soluble dyes. In contrast to nappa leather, no additional pigment layer is applied, as this would hide small imperfections. This means that aniline leather can only be made from skins that have no wounds or marks whatsoever, which results in only five out of 100 being of sufficient quality. The result of this is aniline leather being particularly pleasant, optically as well as haptically. Also it is slightly elastic to the pull in one direction. This is an advantage when being used for our light full-head masks, as it makes them particularly tight and snug-fitting, almost like a rubber mask. Care Instructions: As its surface lacks a pigment layer, aniline leather is not waterproof. You should avoid spilling food or drink on the mask. To clean only wipe the mask down with a damp cloth. Do not use grease or oil. If the leather should lose some of its softness after a while, simply massage it using your hands. It will quickly become as soft and supple as new.
This practical bag offers plenty of space to neatly organize and carry a fairly extensive selection of equipment to play parties. If you’ve spent some time in the BDSM scene, you may have already come across the McHurt Toy Bag. We’ve had it in our range for about three years now - however, until now, it’s only been available in-store or at fairs. After this thorough testing phase, we are now making it available online starting in 2024. Hooks inside the body and lid of the bag provide ample options for securing impact toys, which can be fastened with additional straps. The elastic bands in the lid are typically used to hold riding crops or canes (the bag fits canes up to 85 cm in length). Elastic straps along the inner wall of the main compartment are ideal for holding cuffs, collars, etc. If you use our McHurt cuffs, one pair each in sizes Medium and Large (for hands and feet) fit perfectly side by side. On the opposite side, three small mesh pockets are provided — perfect for storing clamps, lubricant, hygiene items, or other small, wicked tools. Even with all this, there’s still plenty of room left for more devious items such as suspension restraints, rope sets, and so on. Items that you need to access quickly, such as blindfolds, can be stored in the two small outer pockets with separate zippers. You can also keep your wallet, phone, or keys there if needed. These two outer pockets can be secured against unauthorized opening with small padlocks on the attached D-rings. The main compartment’s zippers can also be locked with a small padlock. However, please note that we have changed the zipper design: unlike in the photos, the zipper pulls no longer have small holes for attaching a lock — instead, the two sliders can be fastened directly to each other. The toy bag can be carried comfortably by its handle, or alternatively, using the detachable and adjustable shoulder strap included. One of the small outer pockets features a transparent slot in business-card format, allowing you to personalize your bag with a name tag or similar label. During the trial phase, the bag proved quite capable of handling a solid load. However, it should not be overburdened — this is not a heavy-duty trolley for chains or handcuff collections. And above all: this bag is not designed for checking in on flights! A quick note about the interior zippers: You’ll notice several zippers in the lid and body that appear to be “installed the wrong way around.” These are intentional and part of the production process. They only cover padding material. Please do not open these zippers — once opened, they are very difficult to close again! The outer shell of the McHurt Toy Bag is made of anthracite-black synthetic leather. Colored exterior zippers provide an attractive contrast. If you prefer an all-black look, choose the version with black zippers. You can select from six different color combinations: Lining bordeaux red, zipper black Lining bordeaux red, zipper bordeaux red Lining violet-purple, zipper black Lining violet-purple, zipper violet-purple Lining olive-gray, zipper black Lining emerald green, zipper black Lining emerald green, zipper emerald green Please select your preferred color combination when placing your order. External dimensions: Length: approx. 90 cm Depth: approx. 22 cm (including outer pockets) Height: approx. 15 cm Weight: approx. 3 kg Scope of delivery: 1 toy bag with detachable shoulder strap (unfortunately, contents not included!)
Deswegen ist ein Ringknebel die richtige Wahl Dieser Knebel ist auf ganzer Linie ein gemeines Ding. Der Ring hält den Mund weit geöffnet und drückt die Zunge nach hinten. Genau diese Konstruktion macht den Ringknebel so interessant. Der Ring hält den Mund offen und kann je nach Größe das Einführen verschiedener Gegenstände ermöglichen. Gleichzeitig können die weit geöffnete Mundstellung und die nach hinten gedrängte Zunge das Schlucken erschweren und den Speichelfluss verstärken. Gerade dieser Effekt kann in BDSM Szenarien gezielt für Demütigung eingesetzt werden. Der Ringknebel ist in drei Größen erhältlich: 40, 45 und 50 Millimeter Innendurchmesser. Dabei sollten Sie die Größenangabe nicht einfach mit der Größe eines Ballknebels vergleichen. Ein Metallring mit 50 Millimetern Innendurchmesser stellt für den Mund eine andere Herausforderung dar als ein Ballknebel mit einem Durchmesser von 50 Millimetern. Wenn Sie bisher mit Ballknebeln Erfahrung gesammelt haben, sollten Sie deshalb nicht automatisch zur gleichen Größe greifen. Gerade bei einem Ringknebel empfiehlt es sich, zunächst eine kleinere Variante zu wählen und sich an die Konstruktion zu gewöhnen. Der Ring wird mit einem weichen Lederriemen im Nacken befestigt. Die Länge des Riemens lässt sich an unterschiedliche Kopfgrößen anpassen. Welche Größen gibt es beim Ringknebel? Bei diesem Ringknebel stehen drei Innendurchmesser zur Auswahl: 40, 45 und 50 Millimeter. Die Angabe bezieht sich auf den Innendurchmesser des Rings. Das ist bei der Auswahl entscheidend, denn ein größerer Ring verändert die Mundöffnung deutlich. Schon der Sprung von 40 auf 50 Millimeter bedeutet eine erhebliche Veränderung. Wenn Sie bisher beispielsweise einen Ballknebel mit 50 Millimetern verwendet haben, sollten Sie daraus nicht ableiten, dass ein Ringknebel mit 50 Millimetern ebenfalls passend ist. Die beiden Konstruktionen verteilen den Druck und öffnen den Mund auf unterschiedliche Weise. Ringknebel mit bis zu 5 cm: Was bedeutet der Innendurchmesser? Ein Ringknebel mit 5 cm hat einen Innendurchmesser von 50 Millimetern. Diese Größe ist bereits eine deutliche Herausforderung für den Mund und sollte deshalb nicht einfach aufgrund der maximalen Größe gewählt werden. Gerade bei Ringknebeln ist die Vorstellung „größer ist besser" wenig hilfreich. Entscheidend ist, ob die Größe zur jeweiligen Anatomie passt und sich kontrolliert verwenden lässt. Die 50 Millimeter Variante kann für Personen mit entsprechend großem Kiefer infrage kommen. Eine pauschale Aussage, dass diese Größe für eine bestimmte Personengruppe grundsätzlich geeignet oder ungeeignet ist, lässt sich dagegen nicht treffen. Die individuelle Anatomie ist entscheidend. Ringknebel aus Metall Der Ring dieser Variante besteht aus Metall. Zusammen mit dem weichen Lederriemen entsteht eine Kombination aus einem festen Ring und einer flexiblen Befestigung. Gerade beim Ring selbst spielt die Verarbeitung eine wichtige Rolle. Kontrollieren Sie vor der Verwendung, ob der Ring unbeschädigt ist und keine Stellen aufweist, die im Mund unangenehm werden könnten. Auch der Lederriemen sollte regelmäßig auf Verschleiß kontrolliert werden. Bei einem Produkt, das direkt mit dem Mund in Kontakt kommt, gehört eine gründliche Reinigung zur normalen Pflege. Dabei sollten Sie die Eigenschaften von Metall und Leder berücksichtigen, da beide Materialien unterschiedlich behandelt werden müssen. Wie wählen Sie die richtige Größe aus? Bei einem Ringknebel ist die Größe einer der wichtigsten Punkte bei der Auswahl. Der Innendurchmesser bestimmt maßgeblich, wie weit der Mund geöffnet wird und wie stark die Zunge verdrängt werden kann. Wenn Sie bisher nur mit Ballknebeln gearbeitet haben, sollten Sie deren Größe nicht eins zu eins auf einen Ringknebel übertragen. Ein 50 Millimeter großer Ball und ein Ring mit 50 Millimetern Innendurchmesser fühlen sich im Mund deutlich unterschiedlich an. Im Zweifel ist die kleinere Variante der bessere Ausgangspunkt. Sie können sich mit der Konstruktion vertraut machen und anschließend beurteilen, ob eine größere Größe überhaupt sinnvoll ist. Achten Sie während der Anwendung auf Schmerzen, Taubheitsgefühle, Atemprobleme oder andere deutliche Beschwerden. In solchen Fällen sollte die Anwendung sofort beendet werden. Sind Ringknebel bequem? Ein Ringknebel ist kein Produkt, das auf ein möglichst unauffälliges Tragegefühl ausgelegt ist. Der offene Ring hält den Mund weit geöffnet und verändert die Position der Zunge. Genau diese Eigenschaften machen einen Teil seiner Wirkung aus. Wie angenehm oder unangenehm ein Ringknebel empfunden wird, hängt von der Größe, der individuellen Anatomie und der Dauer der Anwendung ab. Ein zu großer Ring kann die Belastung deutlich erhöhen. Auch der Lederriemen spielt eine Rolle. Er sollte so eingestellt werden, dass der Ring an seiner vorgesehenen Position bleibt, ohne unnötig Druck auf den Kopf auszuüben. Bei einem Ringknebel sollten Sie deshalb die Wirkung nicht allein anhand des Durchmessers beurteilen. Entscheidend ist das Zusammenspiel aus Größe, Konstruktion und individueller Anatomie. Ringknebel oder Spinnenknebel? Ringknebel und Spinnenknebel unterscheiden sich bereits optisch deutlich. Beim Ringknebel befindet sich ein einzelner Ring im Mund. Seine Konstruktion sorgt dafür, dass der Mund weit geöffnet bleibt. Beim Spinnenknebel kommt eine andere Bauform zum Einsatz. Dadurch unterscheiden sich die beiden Knebel in ihrer Konstruktion und im Tragegefühl. Wenn Sie zwischen den beiden Varianten wählen, sollten Sie deshalb nicht allein nach dem Durchmesser gehen. Entscheidend ist, welche Konstruktion Sie suchen und welche Wirkung für Ihr BDSM Szenario im Vordergrund steht. Für einen detaillierten Vergleich der konkreten Modelle sollten die jeweiligen Produktinformationen herangezogen werden, da sich Spinnenknebel je nach Bauform unterscheiden können. Welche Alternativen gibt es zu einem Ringknebel? Die naheliegendste Alternative ist ein Spreizknebel. Ein Spinnenknebel stellt eine weitere Alternative dar, wobei die konkrete Konstruktion vom jeweiligen Modell abhängt. Hier wird der Mund durch einen Ball geöffnet beziehungsweise teilweise ausgefüllt. Dadurch entsteht ein anderes Tragegefühl als bei einem offenen Ring. Der Ringknebel eignet sich vor allem dann, wenn die offene Mundstellung und die damit verbundene Wirkung im Mittelpunkt stehen. Wenn Sie einen anderen Effekt oder ein anderes Tragegefühl suchen, kann ein anderer Knebeltyp die passendere Wahl sein. Wie reinigen und pflegen Sie einen Ringknebel? Der Ringknebel kommt direkt mit dem Mund in Kontakt und sollte deshalb nach der Verwendung gründlich gereinigt werden. Der Metallring und der Lederriemen müssen dabei getrennt betrachtet werden. Den Metallring können Sie entsprechend den Eigenschaften des verwendeten Metalls reinigen. Beim Lederriemen sollten Sie dagegen auf eine materialgerechte Pflege achten. Leder sollte nicht unnötig durchnässt werden und nach der Reinigung vollständig trocknen können. Nutzen mehrere Personen denselben Ringknebel, ist eine gründliche Reinigung zwischen den Anwendungen besonders wichtig. Nutzen Sie den Reinigungsvorgang außerdem für eine kurze Kontrolle des gesamten Produkts. Prüfen Sie den Ring, die Befestigung und den Lederriemen auf Beschädigungen oder Verschleiß. Wenn eine Komponente beschädigt ist, sollte der Ringknebel nicht weiter verwendet werden. Häufige Fragen zum Ringknebel Welche Funktion hat ein Ringknebel? Ein Ringknebel hält den Mund weit geöffnet und kann die Zunge nach hinten drücken. Dadurch können sich Speichelfluss und Schluckverhalten verändern. Was bedeutet Ringknebel 5 cm? Ein Ringknebel mit 5 cm besitzt einen Innendurchmesser von 50 Millimetern. Diese Größe sollte aufgrund der größeren Mundöffnung sorgfältig ausgewählt werden. Ist ein 50 mm Ringknebel größer als ein 50 mm Ballknebel? Die Maßangabe allein lässt keinen direkten Vergleich des Tragegefühls zu. Ein Ring mit 50 Millimetern Innendurchmesser und ein Ball mit 50 Millimetern Durchmesser haben unterschiedliche Konstruktionen und wirken deshalb unterschiedlich im Mund. Sind Ringknebel bequem? Das hängt von der Größe, der Anatomie und der Dauer der Anwendung ab. Ein Ringknebel verändert die Mundstellung deutlich und ist deshalb nicht mit einem gewöhnlichen Mundstück vergleichbar. Welche Materialien gibt es bei Ringknebeln? Bei der hier beschriebenen Variante besteht der Ring aus Metall und die Befestigung aus einem weichen Lederriemen. Was ist der Unterschied zwischen einem Ringknebel und einem Spinnenknebel? Beide Modelle unterscheiden sich in ihrer Konstruktion. Ein Ringknebel verwendet einen einzelnen offenen Ring im Mund, während Spinnenknebel eine andere Bauform besitzen. Wie reinigen Sie einen Ringknebel? Der Metallring sollte gründlich gereinigt werden. Der Lederriemen benötigt eine materialgerechte Pflege und sollte nicht unnötig durchnässt werden. Welche Größe sollten Sie wählen? Bei der Größenwahl sollten Sie die individuelle Anatomie berücksichtigen. Wer bisher Ballknebel verwendet hat, sollte deren Größe nicht automatisch auf einen Ringknebel übertragen. Im Zweifel bietet sich zunächst eine kleinere Variante an.
Translation is coming soon! Length of the chains about 15 Centimeter Length about 32 Centimeter Circumference of the handle about 18 Millimeter Weight about 50 Gramm
The mini version of our classic “The Punch”. It's ideal for putting someone over your knee, short and therefore flexible in use. This unconventional instrument is characterised by its extremely thuddy effect. The hemisphere is made from a firm, but not hard material. Due to this it creates a very deep impact, which is even more enhanced by the flexible handle. This effect is best comparable to a hand in a boxing glove, while not hitting too hard. The impact is primarily not very hard ont he surface, but still very in depth and exhaustive. For sub-jects, who get off on dull pain, The Punch can easily transform into the perfect drug. Prolonged use can – even after a short time -. create black and blue marks. Please do not underestimate it! We use our English bridle leather (please see information below) in black for the production of The Punch and for the cover of the hemisphere nappa leather in burgundy is used. Length approx. 35 centimetres Diameter approx. 10 centimetres The Punch mini:Handle is about 14cm longand diameter of the Punch is around 7,5 cmhight of the punch cushion is around 2,5cm high Differences Mini Punch to our original PunchThe original Punch:Handle is around 20cm long and the diameter of the Punch is around 11cmheight of the punch cushion is around 4,5 cm high
Die Halsfessel mit 3 D-Ringen ist eine hervorragende Kombination aus einem funktionalen Halsband mit Fixiermöglichkeiten und einem eleganten Ausgeh-Accessoir.Mit ihrer Breite von ca. 5 Zentimetern und den 3 stabilen D-Ringen ist sie nicht nur ein echter Hingucker, sondern auch ein sehr nützliches Fessel-Utensil, um besonders freche Finger am unbefugten Herumwandern zu hindern.Die schmalen Lederpaspeln in Bordeaux-rot verleihen dem gesamten Halsband eine gewisse Eleganz, besonders wenn sie mit farblich passenden Manschetten (wie unseren Wotan-Manschetten) kombiniert werden.Die Halsfessel wird aus weichem Rind-Nappaleder gefertigt und ist leicht gepolstert. Damit bietet sie trotz der Breite einen hohen Tragekomfort - auch über Stunden hinweg. Erhältlich in vier Größen: small (ca. 28 bis 35 Zentimeter) medium (ca. 32 bis 38 Zentimeter) large (ca. 36 bis 43 Zentimeter) extra-large (ca. 39 bis 47 Zentimeter)
Die Halsfessel mit 3 D-Ringen ist eine hervorragende Kombination aus einem funktionalen Halsband mit Fixiermöglichkeiten und einem eleganten Ausgeh-Accessoir.Mit ihrer Breite von ca. 5 Zentimetern und den 3 stabilen D-Ringen ist sie nicht nur ein echter Hingucker, sonder auch ein sehr nützliches Fessel-Utensil, um besonders freche Finger am unbefugten Herumwandern zu hindern.Die schmalen Lederpaspeln in Weiß verleihen dem gesamten Halsband eine gewisse Eleganz, besonders wenn sie mit farblich passenden Manschetten (wie unseren Wotan-Manschetten) kombiniert werden.Die Halsfessel wird aus weichem Rind-Nappaleder gefertigt und ist leicht gepolstert. Damit bietet sie trotz der Breite einen hohen Tragekomfort - auch über Stunden hinweg. Erhältlich in vier Größen: small (ca. 28 bis 35 Zentimeter) medium (ca. 32 bis 38 Zentimeter) large (ca. 36 bis 43 Zentimeter) extra-large (ca. 39 bis 47 Zentimeter)
This neck restraint with 3 d-rings is the fabulous combination of a functional collar suitable for affixing individuals and an elegant fashion accessory.At 5 centimetres width and with 3 durable d-rings it will not only draw peoples attention but also keep naughty fingers from wandering idly.The neck restraint is made from soft nappa cow‘s leather and slightly padded. This way it will be comfortable to wear despite its width – for hours, if necessary.Available in four sizes:small (approx. 28 to 35 centimeters),medium (approx. 32 to 38 centimeters),large (approx. 36 to 43 centimeters)extra-large (approx. 39 to 47 centimeters)