This hood is famous since John Willies adventures around Sweet Gwendoline and other defencelessly tied up girls.
The helplessly soulful gaze of Gwendoline is heartwarming and it raises the question, if this is due to the laced mask by itself, or maybe by a hidden gag underneath!?
The Gwendoline Mask is made from very soft cow-Nappa, which molds wonderfully around the head when this mask is laced fully. The leather snuggles tightly around the mouth and reduces the ability to speak even without the use of a gag. When introducing a gag before lacing this mask it will stay subtly visible, but still won't be very conspicuous.
The mask ends directly below the nose keeping only the field of view free, which will be pushed slightly outwards due to the tight lacing.
The style of the mask is made to be short, so the neck remains free and can therefore be combined with our Neck Corset or other bondage paraphernalia for example.
For the problem-free fitting of the Gwendoline Mask please open the lacing all the way to the top.
Available in four sizes.
Please find the measurements in the table below.
Size chart: Leather Masks
(all measurements are in centimetres!)
| S | M | L | XL | |
|---|---|---|---|---|
| Circumference of neck |
33-36 |
36-39 | 39-42 | 42-45 |
| Circumference of head at mouth |
46-51 | 49-54 | 52-58 | 57-61 |
| Circumference of head above eyebrows |
52-56 | 55-59 | 58-62 | 61-65 |
| Circumference of head: tip of chin - back of head |
63-66 | 65-68 | 67-70 | 69-72 |
Please measure the following areas with a tape measure. Alternatively you can use a thread or cord which after marking can be measured with a ruler.
The most important measurement is the circumference of head: tip of chin - back of head
If you are unsure, please send us the single measurements and we will be glad to help you further!
A: Circumference of neck
B: Circumference of head at height of mouth
C: Circumference of head at height of eyebrows
D: Circumference of head: tip of chin - back of head (longest distance)
Login
Accessory Items
This Long Neck Corset is reinforced with light metal rods and supports a straight posture for neck and head. In the front it braces the chin and reaches up under the nose, in the back it is tailored high up around the back of the head. As a consequence the rotation of the head as well as bending forward or stretching it back is greatly reduced. At least an escape of the chin from the corset is reliably prevented.When using a tight lacing the chin and mouth area will be substantially enclosed allowing only very limited speach. For further intensification a ball gag can be hidden wonderfully underneath the chin cover. The corset is to be laced full length in the back.Before donning it's been proven useful to completely remove the cord. So the corset can be wrapped around the neck comfortably and the lacing is started from the top. This way a perfect positioning of the corset around the nose and chin is ensured from the beginning. When the lacing starts getting tight in this area the corset won't slip out of place and the rest of the lacing can be done in peace.Only with lacing on the lower part the corset draws tight and straightens neck and head into the desired position. We provide two cords for the neck corset. But we advise against lacing in the usual way from above and below towards the center as for waist corsets, because this does usually not lead to the ideal fit. If required you can try both versions, of course, to decide between the one or the other technique of lacing. To prevent the wearer to fiddle about with the cords we recommend using a double bow on the lacing at the end, since such a bow is not easily opened if the person cannot see it directly. By the way, this Neck Corset can be perfectly combined with our Gwendoline's Mask (prod. no. MRL511) or our Bolero Armbinder (prod. no. MRL109)! For the fitting of the neck corset we recommend to note the following information:This neck corset has a slim tailored fit and therefore fits slender necks best. As a rule for shorter necks and fuller jaw-lines with a double chin this fit is not suited very well. Our Long Neck Corset is available in four sizes. Please find the measurements in the table below. Size chart for Long Neck Corset(all measurements are in centimetres!) SMLXL Circumference of neck 30-36 35-41 40-46 44-50 Circumference of head at mouth 34-47 42-55 50-63 58-71
Ball gag with red ball made from Platinum-Silicone on a soft leather strap. Our gag balls are completely taste- and odourless and offer a very pleasant bite resistance. They are flexible enough to not damage the teeth, but solid enough to not be able to flatten the ball with the mouth. The balls are very robust. Even forceful bites will hardly leave any teeth marks. These gags can be worn very comfortably and for a long time if needed. They leave relatively few marks on the face, as the straps are stitched from soft garments leather and free from studs or eyelets, except for the buckle fastener at the back. Available with three different sized silicone balls: Small:approx. 38 millimetres (for small chatterboxes and people who easily retch) Medium:approx. 45 millimetres (the medium standard size) Large:approx. 52 millimetres (for big chatterboxes and for the connoisseur of quietude) Extra Large: approx. 60mm (for those special cases who will not be silenced by a Large ball)Please note: For most people accommodating a 60mm-ball will not be anatomically possible! Only select size XL, if you already have practical experience using balls sized Large. Otherwise it might turn into a case of trying to bite off more than you can chew. And then there will be tears.
Similar Items
Our light full masks will fit any head snugly like a second skin.They are sewn from particularly soft and slightly elastic aniline leather (see additional information below), creating a very flattering appearance. The leather will fit snugly on any head, clearly showing its shape below. The tighter the mask is worn, the more obvious this effect will be. This version lacks eyeholes causing a significant sensory inhibition. The wearer will be completely blind, while fully able to speak and/or drink due to the mouth-opening. The restrictive effect can be enhanced significantly by using a ball-gag, which has to be put in before tightening the mask, as a tightened mask does not allow opening the mouth sufficiently. The ball-gag’s straps can be led through the mask’s mouth-opening and pulled tight at the back of the neck. Using this combination the light full-head mask will render the wearer completely helpless. Available in four sizes. Please refer to the table below to find your size. Size chart: Leather Masks (all measurements are in centimetres!) SMLXL Circumference of neck 33-36 36-39 39-42 42-45 Circumference of head at mouth 46-51 49-54 52-58 57-61 Circumference of head above eyebrows 52-56 55-59 58-62 61-65 Circumference of head: tip of chin - back of head 63-66 65-68 67-70 69-72 Advice for easy putting-on of mask: First open the lacing all the way to the top. As soon as the mask has been pulled over the head, do not immediately pull the cords tight at the top. Instead evenly pull the cords all the way down without using too much force. After this, slowly tighten from top to bottom until the mask is at the desired tightness. This way of tightening is necessary in order to guarantee the mask’s perfect fit. If you start by pulling the upper part very tight, the entire mask may ride up and create the impression of not fitting. What does Aniline Leather mean? Do not let the material’s name confuse you. Historically, this type of leather has been dyed using aniline-based dyes, but today it refers to a particular natural, high-quality leather. You can find more detailed information here:https://en.wikipedia.org/wiki/Aniline_leatherAniline leather is tanned and subsequently dyed using entirely water-soluble dyes. In contrast to nappa leather, no additional pigment layer is applied, as this would hide small imperfections. This means that aniline leather can only be made from skins that have no wounds or marks whatsoever, which results in only five out of 100 being of sufficient quality. The result of this is aniline leather being particularly pleasant, optically as well as haptically. Also it is slightly elastic to the pull in one direction. This is an advantage when being used for our light full-head masks, as it makes them particularly tight and snug-fitting, almost like a rubber mask. Care Instructions: As its surface lacks a pigment layer, aniline leather is not waterproof. You should avoid spilling food or drink on the mask. To clean only wipe the mask down with a damp cloth. Do not use grease or oil. If the leather should lose some of its softness after a while, simply massage it using your hands. It will quickly become as soft and supple as new.
Our light full masks will fit any head snugly like a second skin.They are sewn from particularly soft and slightly elastic aniline leather (see additional information below), creating a very flattering appearance. The leather will fit snugly on any head, clearly showing its shape below. The tighter the mask is worn, the more obvious this effect will be. This version’s mouth is shut, while the perforated eye area allows the wearer very good use of eyes but will markedly interfere with speaking. This means that this version is a lot more restrictive than the versions with a hole for the mouth. A ball-gag put in before tying the mask would be slightly visible but massively enhance restrictiveness. If needed, you can of course add a blindfold (like our narrow eye-mask ML111). Vital! Please note:The nose-area only has very small air-holes for breathing. If you close the eye-area, the influx of air may be reduced further. It may be necessary to enlarge the air-holes or add further holes in this case. Available in four sizes. Please refer to the table below to find your size. Size chart: Leather Masks (all measurements are in centimetres!) SMLXL Circumference of neck 33-36 36-39 39-42 42-45 Circumference of head at mouth 46-51 49-54 52-58 57-61 Circumference of head above eyebrows 52-56 55-59 58-62 61-65 Circumference of head: tip of chin - back of head 63-66 65-68 67-70 69-72 Advice for easy putting-on of mask: First open the lacing all the way to the top. As soon as the mask has been pulled over the head, do not immediately pull the cords tight at the top. Instead evenly pull the cords all the way down without using too much force. After this, slowly tighten from top to bottom until the mask is at the desired tightness. This way of tightening is necessary in order to guarantee the mask’s perfect fit. If you start by pulling the upper part very tight, the entire mask may ride up and create the impression of not fitting. What does Aniline Leather mean? Do not let the material’s name confuse you. Historically, this type of leather has been dyed using aniline-based dyes, but today it refers to a particular natural, high-quality leather. You can find more detailed information here:https://en.wikipedia.org/wiki/Aniline_leatherAniline leather is tanned and subsequently dyed using entirely water-soluble dyes. In contrast to nappa leather, no additional pigment layer is applied, as this would hide small imperfections. This means that aniline leather can only be made from skins that have no wounds or marks whatsoever, which results in only five out of 100 being of sufficient quality. The result of this is aniline leather being particularly pleasant, optically as well as haptically. Also it is slightly elastic to the pull in one direction. This is an advantage when being used for our light full-head masks, as it makes them particularly tight and snug-fitting, almost like a rubber mask. Care Instructions: As its surface lacks a pigment layer, aniline leather is not waterproof. You should avoid spilling food or drink on the mask. To clean only wipe the mask down with a damp cloth. Do not use grease or oil. If the leather should lose some of its softness after a while, simply massage it using your hands. It will quickly become as soft and supple as new.
Our light full masks will fit any head snugly like a second skin.They are sewn from particularly soft and slightly elastic aniline leather (see additional information below), creating a very flattering appearance. The leather will fit snugly on any head, clearly showing its shape below. The tighter the mask is worn, the more obvious this effect will be. This version leaves mouth and eyes open, meaning the wearer is able to see and speak. It does not allow for opening the mouth particularly wide though. This means that the mask can be used for anonymisation, but can also easily be made more restrictive by adding an eyemask (e.g. our narrow eyemask, Art.No. MML111) or a ball gag. This version with holes for mouth and eyes allows for particularly long periods of wearing but will mark skin at the openings for a while after taking off the mask. Available in four sizes. Please refer to the table below to find your size. Size chart: Leather Masks (all measurements are in centimetres!) SMLXL Circumference of neck 33-36 36-39 39-42 42-45 Circumference of head at mouth 46-51 49-54 52-58 57-61 Circumference of head above eyebrows 52-56 55-59 58-62 61-65 Circumference of head: tip of chin - back of head 63-66 65-68 67-70 69-72 Advice for easy putting-on of mask: First open the lacing all the way to the top. As soon as the mask has been pulled over the head, do not immediately pull the cords tight at the top. Instead evenly pull the cords all the way down without using too much force. After this, slowly tighten from top to bottom until the mask is at the desired tightness. This way of tightening is necessary in order to guarantee the mask’s perfect fit. If you start by pulling the upper part very tight, the entire mask may ride up and create the impression of not fitting. What does Aniline Leather mean? Do not let the material’s name confuse you. Historically, this type of leather has been dyed using aniline-based dyes, but today it refers to a particular natural, high-quality leather. You can find more detailed information here:https://en.wikipedia.org/wiki/Aniline_leatherAniline leather is tanned and subsequently dyed using entirely water-soluble dyes. In contrast to nappa leather, no additional pigment layer is applied, as this would hide small imperfections. This means that aniline leather can only be made from skins that have no wounds or marks whatsoever, which results in only five out of 100 being of sufficient quality. The result of this is aniline leather being particularly pleasant, optically as well as haptically. Also it is slightly elastic to the pull in one direction. This is an advantage when being used for our light full-head masks, as it makes them particularly tight and snug-fitting, almost like a rubber mask. Care Instructions: As its surface lacks a pigment layer, aniline leather is not waterproof. You should avoid spilling food or drink on the mask. To clean only wipe the mask down with a damp cloth. Do not use grease or oil. If the leather should lose some of its softness after a while, simply massage it using your hands. It will quickly become as soft and supple as new.
Our light full masks will fit any head snugly like a second skin. They are sewn from particularly soft and slightly elastic aniline leather (see additional information below), creating a very flattering appearance. The leather will fit snugly on any head, clearly showing its shape below. The tighter the mask is worn, the more obvious this effect will be. This version has an opening for the mouth as well as a perforated eye-area, which allows the wearer to see, but will make them anonymous to any onlooker. The mouth-opening permits speaking and drinking. The restrictive effect can be enhanced drastically using a blindfold (e.g. our narrow eye mask, Article MML111) and/or a ball-gag. The latter has to be put in before tightening the mask, as it is not possible to open the mouth sufficiently in a tight mask. The ball-gag’s straps can be led through the mask’s mouth-opening and pulled tight behind the neck. Using this combination the light full-head mask will render the wearer totally helpless. Vital! Please note:The nose-area only has very small air-holes for breathing. If you close the eye-area, the influx of air may be reduced further. It may be necessary to enlarge the air-holes or add further holes. Available in four sizes. Please find the measurements in the table below. Size chart: Leather Masks (all measurements are in centimetres!) SMLXL Circumference of neck 33-36 36-39 39-42 42-45 Circumference of head at mouth 46-51 49-54 52-58 57-61 Circumference of head above eyebrows 52-56 55-59 58-62 61-65 Circumference of head: tip of chin - back of head 63-66 65-68 67-70 69-72 Advice for easy putting-on of mask: First open the lacing all the way to the top. As soon as the mask has been pulled over the head, do not immediately pull the cords tight at the top. Instead evenly pull the cords all the way down without using too much force. After this, slowly tighten from top to bottom until the mask is at the desired tightness. This way of tightening is necessary in order to guarantee the mask’s perfect fit. If you start by pulling the upper part very tight, the entire mask may ride up and create the impression of not fitting. What does Aniline Leather mean? Do not let the material’s name confuse you. Historically, this type of leather has been dyed using aniline-based dyes, but today it refers to a particular natural, high-quality leather. You can find more detailed information here:https://en.wikipedia.org/wiki/Aniline_leatherAniline leather is tanned and subsequently dyed using entirely water-soluble dyes. In contrast to nappa leather, no additional pigment layer is applied, as this would hide small imperfections. This means that aniline leather can only be made from skins that have no wounds or marks whatsoever, which results in only five out of 100 being of sufficient quality. The result of this is aniline leather being particularly pleasant, optically as well as haptically. Also it is slightly elastic to the pull in one direction. This is an advantage when being used for our light full-head masks, as it makes them particularly tight and snug-fitting, almost like a rubber mask. Care Instructions: As its surface lacks a pigment layer, aniline leather is not waterproof. You should avoid spilling food or drink on the mask. To clean only wipe the mask down with a damp cloth. Do not use grease or oil. If the leather should lose some of its softness after a while, simply massage it using your hands. It will quickly become as soft and supple as new.
Our light full masks will fit any head snugly like a second skin.They are sewn from particularly soft and slightly elastic aniline leather (see additional information below), creating a very flattering appearance. The leather will fit snugly on any head, clearly showing its shape below. The tighter the mask is worn, the more obvious this effect will be. This particular version offers a very generous opening, allowing the wearer to open their mouth wide, and to perform particular tasks that way. Should keeping the mouth open prove challenging for them, our mouth retractors( s. Art.-No. MGM111 or MGM112) can be used for assistance. As a matter of principle, our masks have their eyes sewn shut, in order to keep the wearer focused on their tasks. This leads to a marked sensory impairment, specifically, rendering the wearer completely blind. Use of a gag can enhance the resulting helplessness nicely – assuming the mouth is not needed for other things at the time. We decided to keep our mask rather short, keeping the neck and throat mostly uncovered. This way it can easily be combined with our neck corset or other accessories. Available in four sizes. Refer to the table below to find your size. Size chart: Leather Masks (all measurements are in centimetres!) SMLXL Circumference of neck 33-36 36-39 39-42 42-45 Circumference of head at mouth 46-51 49-54 52-58 57-61 Circumference of head above eyebrows 52-56 55-59 58-62 61-65 Circumference of head: tip of chin - back of head 63-66 65-68 67-70 69-72 Advice for easy putting-on of mask: First open the lacing all the way to the top. As soon as the mask has been pulled over the head, do not immediately pull the cords tight at the top. Instead evenly pull the cords all the way down without using too much force. After this, slowly tighten from top to bottom until the mask is at the desired tightness. This way of tightening is necessary in order to guarantee the mask’s perfect fit. If you start by pulling the upper part very tight, the entire mask may ride up and create the impression of not fitting. What does Aniline Leather mean? Do not let the material’s name confuse you. Historically, this type of leather has been dyed using aniline-based dyes, but today it refers to a particular natural, high-quality leather. You can find more detailed information here:https://en.wikipedia.org/wiki/Aniline_leatherAniline leather is tanned and subsequently dyed using entirely water-soluble dyes. In contrast to nappa leather, no additional pigment layer is applied, as this would hide small imperfections. This means that aniline leather can only be made from skins that have no wounds or marks whatsoever, which results in only five out of 100 being of sufficient quality. The result of this is aniline leather being particularly pleasant, optically as well as haptically. Also it is slightly elastic to the pull in one direction. This is an advantage when being used for our light full-head masks, as it makes them particularly tight and snug-fitting, almost like a rubber mask. Care Instructions: As its surface lacks a pigment layer, aniline leather is not waterproof. You should avoid spilling food or drink on the mask. To clean only wipe the mask down with a damp cloth. Do not use grease or oil. If the leather should lose some of its softness after a while, simply massage it using your hands. It will quickly become as soft and supple as new.
Our light full masks will fit any head snugly like a second skin.They are sewn from particularly soft and slightly elastic aniline leather (see additional information below), creating a very flattering appearance. The leather will fit snugly on any head, clearly showing its shape below. The tighter the mask is worn, the more obvious this effect will be. This version lacks eyeholes causing a significant sensory inhibition. The wearer will be completely blind, while fully able to speak and/or drink due to the mouth-opening. The restrictive effect can be enhanced significantly by using a ball-gag, which has to be put in before tightening the mask, as a tightened mask does not allow opening the mouth sufficiently. The ball-gag’s straps can be led through the mask’s mouth-opening and pulled tight at the back of the neck. Using this combination the light full-head mask will render the wearer completely helpless. Available in four sizes. Please refer to the table below to find your size. Size chart: Leather Masks (all measurements are in centimetres!) SMLXL Circumference of neck 33-36 36-39 39-42 42-45 Circumference of head at mouth 46-51 49-54 52-58 57-61 Circumference of head above eyebrows 52-56 55-59 58-62 61-65 Circumference of head: tip of chin - back of head 63-66 65-68 67-70 69-72 Advice for easy putting-on of mask: First open the lacing all the way to the top. As soon as the mask has been pulled over the head, do not immediately pull the cords tight at the top. Instead evenly pull the cords all the way down without using too much force. After this, slowly tighten from top to bottom until the mask is at the desired tightness. This way of tightening is necessary in order to guarantee the mask’s perfect fit. If you start by pulling the upper part very tight, the entire mask may ride up and create the impression of not fitting. What does Aniline Leather mean? Do not let the material’s name confuse you. Historically, this type of leather has been dyed using aniline-based dyes, but today it refers to a particular natural, high-quality leather. You can find more detailed information here:https://en.wikipedia.org/wiki/Aniline_leatherAniline leather is tanned and subsequently dyed using entirely water-soluble dyes. In contrast to nappa leather, no additional pigment layer is applied, as this would hide small imperfections. This means that aniline leather can only be made from skins that have no wounds or marks whatsoever, which results in only five out of 100 being of sufficient quality. The result of this is aniline leather being particularly pleasant, optically as well as haptically. Also it is slightly elastic to the pull in one direction. This is an advantage when being used for our light full-head masks, as it makes them particularly tight and snug-fitting, almost like a rubber mask. Care Instructions: As its surface lacks a pigment layer, aniline leather is not waterproof. You should avoid spilling food or drink on the mask. To clean only wipe the mask down with a damp cloth. Do not use grease or oil. If the leather should lose some of its softness after a while, simply massage it using your hands. It will quickly become as soft and supple as new.