Bondage-System "Mala"

This crotch strap is conceived for the combination with our Mala Waist Belt (Art.-Nr. MBL121) or our Ihsan Waist Belt (Art.-Nr. MBL232). In the areas of both orifices, the strap has a long row of holes, which can be used to insert and secure anal and/or vaginal plugs. It can be used by men and women, however, the dual use is naturally reserved for the ladies. The strap can also be used as a regular crotch bondage item, as it pushes into the crotch the more it is tightened. If worn by men, care must be taken that the male paraphernalia are not damaged at the frontal area. With the help of the short slits in the leather at both ends, the crotch strap can be attached at the eyelets of the waist belt. It can be strapped quite taut and then secured with a snap hook or,  to prevent any attempts of escape, a padlock. Our Crotch Straps are sewn from multi layered Nappa leather. The edges are meticulously folded towards the inside, so there is no pinching or pressing in places where this is unintended. The variations for the adjustment of length reach from 46 to 68 centimetres. The width of the strap is approx. 2.5 centimetres. Please note the care instructions (see additional information below) Delivery: Crotch Strap 'Double' (without Waist Belt, connectors or lockings; please order seperately) To use this Crotch Strap, a Waist Belt is additionally needed!

This crotch strap is conceived for the combination with our Mala Waist Belt (Art.-Nr. MBL121) or our Ihsan Waist Belt (Art.-Nr. MBL232). The opening at the front offers the possibility of free access to the vaginal area and allows it to emerge in a decorative way. The tighter the strap is pulled, the stronger this lovely effect gets. The perforated holes in the anus area can aditionally be used to insert and secure a butt plug, should this be required. With the help of the short slits in the leather at both ends, the crotch strap can be attached at the eyelets of the waist belt. It can be strapped quite taut and then secured with a snap hook or,  to prevent any attempts of escape, a padlock. Our Crotch Straps are sewn from multi layered Nappa leather. The edges are meticulously folded towards the inside, so there is no pinching or pressing in places where this is unintended. The variations for the adjustment of length reach from 46 to 68 centimetres. The width of the vaginal opening is approx. 4 centimetres, the width of the strap is almost 2.5 centimetres. Please note the care instructions (see additional information below) Delivery: 1 Crotch Strap 'Ladies' (without Waist Belt, connectors or lockings; please order seperately) To use this Crotch Strap, a Waist Belt is additionally needed!

The Mala bed-fixer strap 'bottom', which is used for the underside of the mattress, is part of our bed-fixer system. On its own the 'bottom' is not usable!It is always used in conjunction with a Mala bed-fixer strap 'top'. Therefore first ascertain the needed measurement of the 'top' and return here.A detailed description to calculate the lengths of the straps can be found on the Mala bed-fixer 'top' product page (Prod. No. MBL151). Now for the details of the Mala bed-fixer 'bottom':You have already determined your desired length for the bed-fixer 'top' as well as the full cicumfrerence of your mattress (as explained in the description of the 'top')?Now substract the length of your choosen 'top' from the entire circumference. The resulting number establishes the minimum length of the strap for the underside of the bed-fixer.You can now choose this length as one 'bottom' strap, if the suitable measurement is available. Alternatively you can combine the Mala bed-fixer 'bottom' with Mala extensions (Prod. No. MBL160) to make the perfect fit. The Mala bed-fixer strap 'bottom' is available in three lengths: 60 centimetres100 centimetres160 centimetres Your choosen length can be a bit longer than what you need exactly, since you can easily adjust the whole length of the bed-fixer system.Under no circumstances should it be shorter though, as it then would not fit around your mattress! If you cannot combine any 'top' and 'bottom' straps to fit your needs, please choose a combination with the Mala extensions (Prod. No. MBL160), which you can fit between the 'top' and 'bottom' straps.This is required with all mattresses exceeding a width of 120 centimeters; depending on your choosen length for the 'top' strap it might also be necessary for smaller mattresses. An overview of the ususal combinations can be found in the table below.However, if you need additional help determining the measurements, please don't hesitate to contact us. We're here to help! Please choose here the version of your Mala bed-fixer 'bottom'. Product contents:1 Mala bed-fixer strap 'bottom'(without additional straps, fasteners or connecting pieces; please order these seperately!) On its own this strap is not usable!To use you also need a Mala bed-fixer strap 'top' (Prod. No. MBL152) and maybe Mala extensions (Prod. No. MBL160). Please remember to also order some carabiners or quick links to connect and fasten the bed-fixers to each other!

Our Mala bed-fixer system is the practical solution to an often occuring problem:How can I fix a person to the bed if it doesn't have any struts or similar practical elements and also doesn't offer the possibilities of permanent eyes (i.e. on holiday, in the hotel bed or simply for matters of disgression)?The answer: A Mala bed-fixer strap 'top' and a Mala bed-fixer strap 'bottom' (if needed with additional extensions) combine into a continuous strap, which wraps around the mattress and has two fixing points on the upper side. And now for the details:First, please, determine how far the fixing points shall be seperated from each other. On the one hand this should not be wider than the width of the mattress, so that the points will remain on the top side of the bed. On the other, they should not be too close together, so that they can support a wide variety of fixings to the bed.You can choose between these lengths of the bed-fixer strap 'top' (the length of the strap is equal to the distance between the fixing points): 60 centimetres80 centimetres100 centimetres120 centimetres (please choose the length) Now please measure the circumference of your mattress, so you can determine the full length for the combination of straps. Preferably you go around once completely.If this isn't possible, since you cannot reach it, please use this guideline:Double the width of the mattress (for the bottom and the top side of it). To this value you add about 30 centimeters for the sides of the mattress.Usually mattresses are not thicker than 15 centimetres; doubling this (for the right and the left side) you get 30 centimeters. Calculation example:Width of the mattress: 100 centimetres x2 results in 200 centimetres, adding 30 centimetres for the sides results in a circumference of 230 centimetres. If you'd like your fixing point to be 80 centimetres apart, you need a 'top' with 80 centimetres. You substract these 80 centimetres from the full measurement of 230 centimetres resulting in 150 centimetres. This means for the underside a 'bottom' of at least 150 centimetres is needed. At this point you should change over to the Mala bed-fixer strap 'bottom' (Prod. No. MBL152) to see the available lengths.You will notice that this exact length is not available. Therefore please chose a 'bottom' with a length of 160 centimetres. This way you can use both straps with your mattresss, as the 'bottom' has plenty of slits to adjust the length. Please choose here the version of your Mala bed-fixer 'top'. Product contents:1 Mala bed-fixer strap 'top'(without additional straps, fasteners or connecting pieces; please order these seperately!) On its own this strap is not usable!To use you also need a Mala bed-fixer strap 'bottom' (Prod. No. MBL152) and maybe Mala extensions (Prod. No. MBL160).

This Connector eyelet additionally extends the already very diverse possibilities to combine various elements of our Mala Bondage system. It can be inserted into any slit of a Mala cuff or a Mala strap to create an additional fixing or connecting point. If you want to create a fixing point for the gag harness on the Mala bed strap or require an extra eyelet on the thigh cuff or . . . or . . or . . .  Let your fantasy run free, there are endless possibilities! Application: the eyelet is simply placed through a slit at the desired place. This eyelet now protrudes and offers options for the attachment of a snap hook, a screw eye-bolt for securing or for connection with other utensils. Alternatively, a padlock can be used to prevent any attempts of escape. The connector eyelet is sewn into a square piece of the the same thick cowhide leather we use for the other elements of our Mala system. It is practical to handle and corresponds with measurements of approx. 5.5 x 5.5 centimetres the width of the cuffs. The metal parts at the inner side are covered with leather in order to avoid contact with the skin. Delivery: 1 'Mala' Connector Eyelet (cuffs shown in the pictures are not included, connectors or lockings not included, please order separately)

This is an extra long version of our Mala cuffs. To obtain a particularly high variability, the slits in the leather almost reach the metal eyelet, so the cuffs can be contracted to a circumference of approx. 8 centimetres on one hand, on the other, they also fit upper arms or all other objects with a circumference of up to 45 centimetres. The cuffs can also easily be used as a fastening to furniture or pillars. If the circumference exceeds 45 centimetres, simply take two cuffs. This way, any number of cuffs can be joined together, until a long belt with several attachment eyelets is formed! Application: the cuffs are pulled tight around the object and fixed at the appropriate setting by placing the rigid eyelet through the slit in the leather. This eyelet now protrudes and offers options for the for the attachment of a snap hook or a screw eye-bolt for the connection to other cuffs or . . . or . . . or . . . Alternatively, a padlock can be used to prevent any attempts of escape. When two cuffs are connected in this way, the binding is considerably  more restrictive than with cuffs, which have D-rings, like for example used with our Ihsan or Wotan cuffs, as these eyelets are fixed. All items of the Mala system are sewn from a thick, very robust, naturally grained cowhide leather. Despite their sturdiness, they are surprisingly soft and flexible. The inside is lined with garment leather without padding; there the metal parts are covered with leather in order to avoid contact with the skin. Width: approx. 5 to 5,5 centimetres Delivery: 1 pair Mala Bondage Cuffs, Size Extra-Large (other cuffs shown in the pictures are not included, connectors or lockings not included, please order separately)

This is the basic version of our Mala cuffs in a size fitting the ankles, or for all other objects with a circumference from 17 to 31 centimetres. The cuffs can also easily be used as a fastening to furniture. One cuff is fixed around the leg of a chair, for example, the other cuff around the ankle. Let your fantasy run free, there are countless possibilities! Application: the cuffs are pulled tight around the object and fixed at the appropriate setting by placing the immovable eyelet through the slit in the leather. This eyelet now protrudes and offers options for the attachment of a snap hook or a screw eye-bolt for the connection to other cuffs or . . . or . . . or . . . Alternatively, a padlock can be used to prevent any attempts of escape. When two cuffs are connected in this way, the binding is considerably  more restrictive than with cuffs which have D-rings, like for example used with our Ihsan or Wotan cuffs, as these eyelets are fixed. Those for whom this level of restrictiveness is still not enough, please view our Mala Foot Combination (Art.-Nr. MBL112). Those cuffs are securely stitched together and do not allow any movement. All items of the Mala system are sewn from a thick, very robust, naturally grained cowhide leather. Despite their sturdiness, they are surprisingly soft and flexible. The inside is lined with garment leather without padding; there the metal parts are covered with leather in order to avoid contact with the skin. Width: approx. 5 to 5,5 centimetres Delivery: 1 pair Mala Bondage Cuffs, Size Large (connectors or lockings not included, please order separately)

This is the basic version of our Mala cuffs in a size fitting very slender to more robust wrists or for all other objects with a circumference from 11 to 23 centimetres. Application: the cuffs are pulled tight around the object and fixed at the appropriate setting by placing the immovable eyelet through the slit in the leather. This eyelet now protrudes and offers options for the attachment of a snap hook or a screw eye-bolt for the connection to other cuffs or . . . or . . . or . . . Alternatively, a padlock can be used to prevent any attempts of escape. When two cuffs are connected in this way, the binding is considerably more restrictive than with cuffs which have D-rings, like for example used with our Ihsan or Wotan cuffs, as the eyelets are fixed. Those for whom this level of restrictiveness is still not enough, please view our Mala Hand Combination (Art.-Nr. MBL112). Those cuffs are securely stitched together and do not allow any movement. These cuffs can also easily be used as a fastening to furniture. One cuff is fixed around the armrest of a chair or the brace on the metal bed, for example, the other around the wrist. Let your fantasy run free, there are countless possibilities! All items of the Mala system are sewn from a thick, very robust, naturally grained cowhide leather. Despite their sturdiness, they are surprisingly soft and flexible. The inside is lined with garment leather without padding; there the metal parts are covered with leather in order to avoid contact with the skin. Width: approx. 5 to 5,5 centimetres Delivery: 1 pair Mala Bondage Cuffs, Size Small/Medium (connectors or lockings not included, please order separately)

These extensions are used as insets between the Mala bed-fixer straps 'top' and 'bottom'. Combining these you can create an individual strap length for the bex-fixers, which fits your mattress perfectly.The extensions are sold as a pair to ensures the extension of the bed-fixers is symmetrical.Each extension provides a variation of length between approx. 9 and 50 centimetres. Using the extensions a combination of the Mala bed-fixers 'top' and 'bottom' can be extended between 18 and 100 centimetres. Please read the descriptions for the Mala bed-fixer 'top (Prod. No. MBL151) and Mala bed-fixer 'bottom' (Prod. No. MBL152) first.You will find all the details to determine the lengths you need, the available measurements and possible combinations for the straps there.A complete overview of the usual combinations you can find in the table under the describtion of the "'botttom'. Product contents:2 Mala extensions (usable lengths adjustable between approx. 9 to 50 centimetres)(without additional straps, fasteners or connecting pieces; please order these seperately!)

This combination consists of two securely stitched together Mala cuffs, size Large, fitting ankles or all other objects with a circumference of 17 to 31 centimetres. The cuffs can also easily be used as a fastening to furniture. One cuff is fixed around the leg of a chair, for example, the other cuff around the ankle. Let your fantasy run free, there are countless possibilities! It is the first time we have produced such securely stitched together combinations. They hardly permit any movement compared to the connection with a snap hook or padlock. These cuffs therefore comply with the wish for absolute restriction, which many customers have expressed. Application: the cuffs are pulled tight around the object and fixed at the appropriate setting by placing the immovable eyelet through the slit in the leather. This eyelet now protrudes and offers options for the attachment of a snap hook or a screw eye-bolt to secure the cuff. Alternatively, a padlock can be used to prevent any attempts of escape. All items of the Mala system are sewn from a thick, very robust, naturally grained cowhide leather. Despite their sturdiness, they are surprisingly soft and flexible. The inside is lined with garment leather without padding; there the metal parts are covered with leather in order to avoid contact with the skin. Width: approx. 5 to 5,5 centimetres Delivery: 1 Bondage Combination,  consisting of two securely stitched together Mala cuffs, Size Large (connectors or lockings not included, please order separately)

This combination consists of two securely stitched together Mala cuffs, size Small/Medium, fitting very slender to more robust wrists or all other objects with a circumference from 11 to 23 centimetres. The cuffs can also easily be used as a fastening to furniture. One cuff is fixed around the armrest of a chair, the other around the wrist. Let your fantasy run free, there are countless possibilities! It is the first time we have produced such securely stitched together combinations. They hardly permit any movement compared to the connection with a snap hook or padlock. These cuffs therefore comply with the wish for absolute restriction, which many customers have expressed. Application: the cuffs are pulled tight around the object and fixed at the appropriate setting by placing the immovable eyelet through the slit in the leather. This eyelet now protrudes and offers options for the attachment of a snap hook or a screw eye-bolt to secure the cuff. Alternatively, a padlock can be used to prevent any attempts of escape. All items of the Mala system are sewn from a thick, very robust, naturally grained cowhide leather. Despite their sturdiness, they are surprisingly soft and flexible. The inside is lined with garment leather without padding; there the metal parts are covered with leather in order to avoid contact with the skin. Width: approx. 5 to 5,5 centimetres Delivery: 1 Bondage Combination,  consisting of two securely stitched together Mala cuffs, Size Small/Medium (connectors or lockings not included, please order separately)

This combination consists of securely stitched together Mala cuffs of different sizes. In each pair, one cuff size Small/Medium (11 to 23 centimetres) and one size Large (17 to 31 centimetres) are combined in order to attach wrists and ankles together without leaving any room for movement. It gets particularly interesting when the lower body is required to be spread open in either the back or kneeling position, possibly with the help of a spreader bar. As hands and feet are usually tied together at the same time in such scenarios, we supply the Hand-Foot Combination always as two pairs. This is why the price is higher, so please don't be surprised! It is the first time we have produced such securely stitched together combinations. They hardly permit any movement compared to the connection with a snap hook or padlock. These cuffs therefore comply with the wish for absolute restriction, which many customers have expressed. Application: the cuffs are pulled tight around the object and fixed at the appropriate setting by placing the immovable eyelet through the slit in the leather. This eyelet now protrudes and offers options for the attachment of a snap hook or a screw eye-bolt to secure the cuff as well as for attachment to other objects, like a spreader bar. Alternatively, a padlock can be used to prevent any attempts of escape. All items of the Mala system are sewn from a thick, very robust, naturally grained cowhide leather. Despite their sturdiness, they are surprisingly soft and flexible. The inside is lined with garment leather without padding; there the metal parts are covered with leather in order to avoid contact with the skin. Width: approx. 5 to 5,5 centimetres Delivery: 2 (!) Bondage Combinations, consisting of securely stitched together hand and foot cuffs (connectors or lockings not included, please order separately)

These cuffs have the typical measurements for thighs, but are also suitable for any other objects with the respective dimensions. They are available in two sizes: Medium: fitting a circumference of 36 to 58 centimetres, Large: fitting a circumference of 52 to 71 centimetres (please choose your size). Application: the cuffs are pulled tightly around the object and fixed at the appropriate setting by placing the immovable eyelet through the slit in the leather. This eyelet now protrudes and offers options for the attachment of a snap hook or a padlock as a safeguard and for joining with other cuffs. These Thigh Cuffs are particularly suited to securing the hands to the thighs. For this purpose the hands are attached to the Thigh Cuff with the help of the Mala Cuffs Small/Medium (Art.-Nr. MBL102). The connection with a snap hook or a padlock is already quite restrictive and allows only for very little movement. Those for whom this level of restrictiveness is still not enough, please view our Mala Thigh – Hand Combination (Art.-Nr. MBL118). There the hand cuffs are securely stitched together with the thigh cuffs and do not allow any movement. All items of the Mala system are sewn from a thick, very robust, naturally grained cowhide leather. Despite their sturdiness, they are surprisingly soft and flexible. The inside is lined with garment leather without padding; there the metal parts are covered with leather in order to avoid contact with the skin. Delivery: 1 pair Mala Thigh Bondage Cuffs, respective of size ordered (other cuffs shown in the pictures are not included, connectors or lockings not included, please order separately)

The Thigh-Hand Combination consists of securely stitched together Mala cuffs of different sizes. In each pair, one hand cuff and one thigh cuff (available sizes please see below) are combined in order to attach wrists and thighs together without leaving any room for movement.  As hands and thighs are usually tied together on both sides at the same time in such scenarios, we always supply the Hand-Thigh Combination as two pairs. It is the first time we have produced such securely stitched together combinations. They hardly permit any movement compared to the connection with a snap hook or padlock. These cuffs therefore comply with the wish for absolute restriction, which many customers have expressed. Application: the cuffs are pulled tight around the object and fixed at the appropriate setting by placing the immovable eyelet through the slit in the leather. This eyelet now protrudes and offers options for the attachment of a snap hook or a screw eye-bolt to secure the cuff. Alternatively, a padlock can be used to prevent any attempts of escape. All items of the Mala system are sewn from a thick, very robust, naturally grained cowhide leather. Despite their sturdiness, they are surprisingly soft and flexible. The inside is lined with garment leather without padding; there the metal parts are covered with leather in order to avoid contact with the skin. The Mala Thigh-Hand Combination is available in two different sizes: Medium: Hand-Cuffs (circumference from 11 to 23 centimetres) stitched together with Thigh-Cuffs Medium (circumference of 36 to 58 centimetres) Large: Hand-Cuffs (circumference from 11 to 23 centimetres) stitched together with Thigh-Cuffs Large (circumference of 52 to 71 centimetres) (please choose your size below). Width: approx. 5 to 5,5 centimetres Delivery: 2 (!) Bondage Combinations, consisting of securely stitched together hand and thigh cuffs (connectors or lockings not included, please order separately)

The Mala Waist Belt is fitted with various attachment points to secure useless hands and feet, to connect a crotch strap but also to affix the whole person to furniture, a tree or . . . or . . . or . . .  Let your fantasy run free, there are countless possibilities! The waist belt is available in four different sizes (for exact measurements please see below). Application: the two halves of the belt are pulled tight around the object and fixed at the appropriate setting by placing the immovable eyelets through the slits in the leather. You can choose the positions on both sides with ease to achieve a symmetrical fit of the belt. The eyelets now protrude and offer options for the attachment of a snap hook or a screw eye-bolt to secure the belt. Alternatively, a padlock can be used to prevent any attempts of escape. The two locking points of the belt are the first attachment points for connecting handcuffs or similar objects. Three more points for attachment can be found on each side of the front and the back and hereby offer numerous possibilities of variations. The centre eyelets are also provided for the connection of our crotch straps (see Art.-Nr. MBL125, MBL126 und MBL128) which opens a whole new world of exciting possibilities! All items of the Mala system are sewn from a thick, very robust, naturally grained cowhide. Despite their sturdiness, they are surprisingly soft and flexible. The inside is lined with garment leather without padding; there the metal parts are covered with leather in order to avoid contact with the skin. Available in four sizes: Extra-Small (52 to 68 centimetres) Small (64 to 84 centimetres) Medium (80 to 100 centimetres) Large (98 to 122 centimetres) (please choose your size) Width approx. 6 to 6.5 centimetres Delivery: 1 Mala Waist Belt, respective of size ordered (other cuffs shown in the pictures are not included, connectors or lockings not included, please order separately)

The Stepless Tensioner is THE practical solution, if a bondage situation is required to become more and more uncomfortable during play! It is a tensioning strap, which is hooked in between two objects, for example a cuff and a bed brace, and can then be pulled tighter in a continuous motion without having to open any buckle or operate another mechanism. Simply hook the D-rings with the help of snap hooks or padlocks between the two objects, then pull at the open end and the length already decreases! This tensioning strap is particularly suitable, for example, for the gradual stretching apart of the lower body, to fix a person in a stretched position between two fixing points, or . . . or . . . or . . .  Let your fantasy run free, there are countless possibilities. The function is quite simple:  At the end of the short half of the strap a double D-ring is located. The end of the other half strap is open and is pulled through between these D-rings (please see photo!) The rings are hereby pulled together in such a way, they only permit movement in one direction, namely shorter! To release the strap again, the tension has to be distinctly decreased. Only then the D-rings will become so loose that the strap can run in the other direction and become longer. This long version of the Stepless Tensioner is adjustable from maximal 80 centimetres to minimal 15 centimetres. Delivery: 1 long Stepless Tensioner with closed eyelets(the wrist-cuffs, locking and connecting elements pictured are not included, but can be ordered separately!)

The Stepless Tensioner is THE practical solution, if a bondage situation is required to become more and more uncomfortable during play! It is a tensioning strap, which is hooked in between two objects, for example a cuff and a bed brace, and can then be pulled tighter in a continuous motion without having to open any buckle or operate another mechanism. Simply hook the tensioner with the snap hooks in between the two objects, then pull at the open end and already the length decreases! At this kindly note: with these snap hooks the tensioner is easiest to use but the snap hooks are not as strong as the screwable or closed eyelets of our other tensioners. Due to that reason this tensioner should not exactly be used for applications with maximum force or the more riotous subs. Apart from that this tensioner is also suitable, for example, for the gradual stretching apart of the lower body, to fix a person in a stretched position between two fixing points, or . . . or . . . or . . .  Let your fantasy run free, there are countless possibilities. The function is quite simple:  At the end of the short half of the strap a double D-ring is located. The end of the other half strap is open and is pulled through between these D-rings (please see photo!) The rings are hereby pulled together in such a way, they only permit movement in one direction, namely shorter! To release the strap again, the tension has to be distinctly decreased. Only then the D-rings will become so loose that the strap can run in the other direction and become longer. This long version of the Stepless Tensioner is adjustable from maximal 80 centimetres to minimal 15 centimetres. Delivery: 1 long Stepless Tensioner with snap hooks(the wrist-cuffs, locking and connecting elements pictured are not included, but can be ordered separately!)

The Stepless Tensioner is THE practical solution, if a bondage situation is required to become more and more uncomfortable during play! It is a tensioning strap, which is hooked in between two objects, for example a cuff and a bed brace, and can then be pulled tighter in a continuous motion without having to open any buckle or operate another mechanism. Simply hook the D-rings with the help of snap hooks or padlocks between the two objects, then pull at the open end and the length already decreases! This tensioning strap is particularly suitable, for example, for the gradual stretching apart of the lower body, to fix a person in a stretched position between two fixing points, or . . . or . . . or . . .  Let your fantasy run free, there are countless possibilities. The function is quite simple:  At the end of the short half of the strap a double D-ring is located. The end of the other half strap is open and is pulled through between these D-rings (please see photo!) The rings are hereby pulled together in such a way, they only permit movement in one direction, namely shorter! To release the strap again, the tension has to be distinctly decreased. Only then the D-rings will become so loose that the strap can run in the other direction and become longer. This short version of the Stepless Tensioner is adjustable from maximal 40 centimetres to minimal 15 centimetres. Delivery: 1 short Stepless Tensioner with closed eyelets(the wrist-cuffs, locking and connecting elements pictured are not included, but can be ordered separately!)

The Stepless Tensioner is THE practical solution, if a bondage situation is required to become more and more uncomfortable during play! It is a tensioning strap, which is hooked in between two objects, for example a cuff and a bed brace, and can then be pulled tighter in a continuous motion without having to open any buckle or operate another mechanism. Simply hook the tensioner with the snap hooks in between the two objects, then pull at the open end and the length already decreases! At this kindly note: with these snap hooks the tensioner is easiest to use but the snap hooks are not as strong as the screwable or closed eyelets of our other tensioners. Due to that reason this tensioner should not exactly be used for applications with maximum force or the more riotous subs. Apart from this, this tensioner is also suitable, for example, for the gradual stretching apart of the lower body, to fix a person in a stretched position between two fixing points, or . . . or . . . or . . .  Let your fantasy run free, there are countless possibilities. The function is quite simple:  At the end of the short half of the strap a double D-ring is located. The end of the other half strap is open and is pulled through between these D-rings (please see photo!) The rings are hereby pulled together in such a way, they only permit movement in one direction, namely shorter! To release the strap again, the tension has to be distinctly decreased. Only then the D-rings will become so loose that the strap can run in the other direction and become longer. This short version of the Stepless Tensioner is adjustable from maximal 40 centimetres to minimal 15 centimetres. Delivery: 1 short Stepless Tensioner with snap hooks(the wrist-cuffs, locking and connecting elements pictured are not included, but can be ordered separately!)

The Stepless Tensioner is a really useful solution for making things increasingly uncomfortable during bondage play.Essentially, it is a leather strap connecting two objects (like a wrist cuff and the strut of a bed), which can then be tightened as desired without the need for any further clasp or mechanism.Fix the strap between two objects using the screw-connector and pull the loose end to shorten! If desired, the triangular screw connectors can be secured via a suitable wrench, preventing idle fingers to get busy opening things they are not supposed to. Use is simple: The shorter end of the strap terminates in a double D-ring. The other, longer end of the strap is open and can be threaded through both D-rings (for illustration, see photo). This pushes the rings together, only allowing development in one way: shorter and tighter.To loosen the strap again, release the tension. Only then can the D-rings‘ grip be sufficiently eased apart to let the belt go the other way and become longer. This short version of the Stepless Tensioner can be adjusted from 40 cm in length to a minimum of 15 centimetres. Included in delivery:1 short Stepless Tensioner with triangular screw-connectors(the wrist-cuffs, locking and connecting elements pictured are not included, but can be ordered separately!)

The Stepless Tensioner is a really useful solution for making things increasingly uncomfortable during bondage play.Essentially, It is a leather strap connecting two objects (like a wrist cuff and the strut of a bed), which can then be tightened as desired without the need for any further clasp or mechanism.Fix the strap between two objects using the screw-connector and pull the loose end to shorten! If desired, the triangular screw connectors can be secured via a suitable wrench, preventing idle fingers to get busy opening things they are not supposed to. Use is simple: The shorter end of the strap terminates in a double D-ring. The other, longer end of the strap is open and can be threaded through both D-rings (for illustration, see photo). This pushes the rings together, only allowing development in one way: shorter and tighter.To loosen the strap again, release the tension. Only then can the D-rings‘ grip be sufficiently eased apart to let the belt go the other way and become longer. This long version of the Stepless Tensioner can be adjusted from 80 cm in length to a minimum of 15 centimetres. Included in delivery:1 lng Stepless Tensioner with triangular screw-connectors(the wrist-cuffs, locking and connecting elements pictured are not included, but can be ordered separately!)